DSTATCOM的CTF控制算法用于功率因数校正和零电压调节

2012 IEEE Third International Conference on Sustainable Energy Technologies (ICSET) Pub Date : 2012-11-26 DOI:10.1109/ICSET.2012.6357391

S. Arya, Bhim Singh

{"title":"DSTATCOM的CTF控制算法用于功率因数校正和零电压调节","authors":"S. Arya, Bhim Singh","doi":"10.1109/ICSET.2012.6357391","DOIUrl":null,"url":null,"abstract":"This paper presents an implementation of three-phase Distribution Static Compensator (DSTATCOM) using character of triangle function (CTF) based control algorithm for reactive power compensation for voltage regulation and power factor correction, harmonic elimination, load balancing of linear/nonlinear loads. CTF based control algorithm is used for extraction of fundamental load active and reactive power components of load currents which are used for estimating the reference source currents. This algorithm requires only multipliers, low pass filters and summers so it is simple and fast. A DSTATCOM is developed and its performance is tested using a DSP. The performance of DSTATCOM is found satisfactory for different type of loads.","PeriodicalId":256740,"journal":{"name":"2012 IEEE Third International Conference on Sustainable Energy Technologies (ICSET)","volume":"306 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2012-11-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"9","resultStr":"{\"title\":\"CTF control algorithm of DSTATCOM for Power factor correction and zero voltage regulation\",\"authors\":\"S. Arya, Bhim Singh\",\"doi\":\"10.1109/ICSET.2012.6357391\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents an implementation of three-phase Distribution Static Compensator (DSTATCOM) using character of triangle function (CTF) based control algorithm for reactive power compensation for voltage regulation and power factor correction, harmonic elimination, load balancing of linear/nonlinear loads. CTF based control algorithm is used for extraction of fundamental load active and reactive power components of load currents which are used for estimating the reference source currents. This algorithm requires only multipliers, low pass filters and summers so it is simple and fast. A DSTATCOM is developed and its performance is tested using a DSP. The performance of DSTATCOM is found satisfactory for different type of loads.\",\"PeriodicalId\":256740,\"journal\":{\"name\":\"2012 IEEE Third International Conference on Sustainable Energy Technologies (ICSET)\",\"volume\":\"306 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2012-11-26\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"9\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2012 IEEE Third International Conference on Sustainable Energy Technologies (ICSET)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICSET.2012.6357391\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2012 IEEE Third International Conference on Sustainable Energy Technologies (ICSET)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICSET.2012.6357391","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 9

摘要

提出了一种基于三角函数特性(CTF)控制算法的三相配电静态补偿器(DSTATCOM)，用于电压调节和功率因数校正、谐波消除、线性/非线性负载均衡的无功补偿。采用基于CTF的控制算法提取负载电流的基本负荷有功和无功分量，用于估计参考源电流。该算法只需要乘法器，低通滤波器和夏季，所以它是简单和快速。研制了DSTATCOM，并利用DSP对其性能进行了测试。DSTATCOM在不同载荷下的性能都令人满意。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

CTF control algorithm of DSTATCOM for Power factor correction and zero voltage regulation

This paper presents an implementation of three-phase Distribution Static Compensator (DSTATCOM) using character of triangle function (CTF) based control algorithm for reactive power compensation for voltage regulation and power factor correction, harmonic elimination, load balancing of linear/nonlinear loads. CTF based control algorithm is used for extraction of fundamental load active and reactive power components of load currents which are used for estimating the reference source currents. This algorithm requires only multipliers, low pass filters and summers so it is simple and fast. A DSTATCOM is developed and its performance is tested using a DSP. The performance of DSTATCOM is found satisfactory for different type of loads.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2012 IEEE Third International Conference on Sustainable Energy Technologies (ICSET)

自引率

0.00%

发文量