用溶剂萃取和蒸馏法回收废旧机油

Journal of Engineering and Applied Sciences , University of Engineering and Technology, Peshawar Pub Date : 2014-12-31 DOI:10.25211/JEAS.V33I2.2342

S. Gul, M. Irfan, H. Bilal, A. Rehman, Umair Khan, S. Khan

{"title":"用溶剂萃取和蒸馏法回收废旧机油","authors":"S. Gul, M. Irfan, H. Bilal, A. Rehman, Umair Khan, S. Khan","doi":"10.25211/JEAS.V33I2.2342","DOIUrl":null,"url":null,"abstract":"A solvent extraction process has been used to recycle the used engine oil. The solvent used for the treatment of used engine oil is a mixture of ethanol, 1- butanol and toluene. The effect of operating parameters on the recycling process has been investigated for optimal conditions. The process parameters considered were agitator speed for blending, boiler temperature and solvent to used oil ratio. The maximum recovery for refined oil was 72% using solvent to used oil ratio of 9:1 at a boiler temperature 120° C and agitator speed of 600 rpm. The maximum solvent recovery of 98% was also obtained at the same process conditions","PeriodicalId":167225,"journal":{"name":"Journal of Engineering and Applied Sciences , University of Engineering and Technology, Peshawar","volume":"21 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2014-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"6","resultStr":"{\"title\":\"RECYCLING OF USED ENGINE OIL USING SOLVENT EXTRACTION AND DISTILLATION\",\"authors\":\"S. Gul, M. Irfan, H. Bilal, A. Rehman, Umair Khan, S. Khan\",\"doi\":\"10.25211/JEAS.V33I2.2342\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A solvent extraction process has been used to recycle the used engine oil. The solvent used for the treatment of used engine oil is a mixture of ethanol, 1- butanol and toluene. The effect of operating parameters on the recycling process has been investigated for optimal conditions. The process parameters considered were agitator speed for blending, boiler temperature and solvent to used oil ratio. The maximum recovery for refined oil was 72% using solvent to used oil ratio of 9:1 at a boiler temperature 120° C and agitator speed of 600 rpm. The maximum solvent recovery of 98% was also obtained at the same process conditions\",\"PeriodicalId\":167225,\"journal\":{\"name\":\"Journal of Engineering and Applied Sciences , University of Engineering and Technology, Peshawar\",\"volume\":\"21 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2014-12-31\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"6\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Engineering and Applied Sciences , University of Engineering and Technology, Peshawar\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.25211/JEAS.V33I2.2342\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Engineering and Applied Sciences , University of Engineering and Technology, Peshawar","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.25211/JEAS.V33I2.2342","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 6

摘要

采用溶剂萃取法回收废旧机油。用于处理废旧机油的溶剂是乙醇、1-丁醇和甲苯的混合物。考察了操作参数对回收过程的影响，确定了最佳工艺条件。考虑了搅拌转速、锅炉温度、溶剂与废油比等工艺参数。在锅炉温度120℃，搅拌器转速600转/分，溶剂与废油比为9:1的条件下，成品油的最大回收率为72%。在相同的工艺条件下，溶剂回收率最高可达98%

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

RECYCLING OF USED ENGINE OIL USING SOLVENT EXTRACTION AND DISTILLATION

A solvent extraction process has been used to recycle the used engine oil. The solvent used for the treatment of used engine oil is a mixture of ethanol, 1- butanol and toluene. The effect of operating parameters on the recycling process has been investigated for optimal conditions. The process parameters considered were agitator speed for blending, boiler temperature and solvent to used oil ratio. The maximum recovery for refined oil was 72% using solvent to used oil ratio of 9:1 at a boiler temperature 120° C and agitator speed of 600 rpm. The maximum solvent recovery of 98% was also obtained at the same process conditions

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Journal of Engineering and Applied Sciences , University of Engineering and Technology, Peshawar

自引率

0.00%

发文量