A Burst and Congestion-Aware Routing Metric for RPL Protocol in IoT Network

The packet loss and power consumption are the main issues considered once congestion occurs in any network, such as the Internet of Things (IoT) with a huge number of sensors and applications. Since IPv6 Routing Protocol for Low Power and Lossy Networks (RPL) is not initially designed for high stream traffic load, this restricts the application domain of RPL in several IoT scenarios such as burst traffic scenarios. The performance of RPL suffers in a network with burst traffic load, which leads to reducing the lifetime of the network and causing traffic congestion among the neighbour nodes. Therefore, to address this issue, we proposed a Burst and Congestion-Aware Metric for RPL called BCA-RPL, which calculates the rank, considering the number of packets. Also, the proposed mechanism includes congestion avoiding and load balancing techniques by switching the best parent selection to avoid the congested area. Our scheme is built and compared to the original RPL routing protocol for low power and lossy network with OF0 (OF0-RPL). Simulation results based on Cooja simulator shows BCA-RPL performs better than the original RPL-OF0 routing protocol in terms of packet loss, power consumption and packet delivery ratio (PDR) under burst traffic load. The BCA-RPL significantly improves the network where it decreases the packet loss around 50% and power consumption to an acceptable level with an improvement on the PDR of the IoT network.