R. Yu, T. Yeo, Hwa-Seng Yap, Kwang-Hung Tan, Chuanjun Zheng, Choon-Tiong Law, Tao Yan, Boon-Seah Quek, Sravanthi Vullikanti, Changqing Xu, Zhiping Li, L. Yeo, Yujing Ting, M. Itoh, Y. Kose
{"title":"90nm CMOS低功耗UHF/13.56MHz/2.4GHz多标准RFID读写收发器SoC","authors":"R. Yu, T. Yeo, Hwa-Seng Yap, Kwang-Hung Tan, Chuanjun Zheng, Choon-Tiong Law, Tao Yan, Boon-Seah Quek, Sravanthi Vullikanti, Changqing Xu, Zhiping Li, L. Yeo, Yujing Ting, M. Itoh, Y. Kose","doi":"10.1109/RWS.2011.5725421","DOIUrl":null,"url":null,"abstract":"A multi-band multi-standard RFID reader SoC is described in this paper. It can be software-reconfigured to support mostly used protocols in UHF, 2.45GHz and 13.56MHz frequency bands. The single-chip reader integrates a RF transceiver, a synthesizer, ADCs/DACs and a digital baseband modem. It achieves >0dBm RX P1dB and >4dBm TX power (without external PAs) for all bands and RX sensitivity down to −72dBm for UHF band in the presence of transmitter carrier leakage. Implemented in a 90nm CMOS process, the reader occupies 3.6×3.8mm2 and consumes less than 114mW from 1.2V/3.3V supply.","PeriodicalId":250672,"journal":{"name":"2011 IEEE Radio and Wireless Symposium","volume":"115 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2011-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"A low-power UHF/13.56MHz/2.4GHz multi-standard RFID reader transceiver SoC in 90nm CMOS\",\"authors\":\"R. Yu, T. Yeo, Hwa-Seng Yap, Kwang-Hung Tan, Chuanjun Zheng, Choon-Tiong Law, Tao Yan, Boon-Seah Quek, Sravanthi Vullikanti, Changqing Xu, Zhiping Li, L. Yeo, Yujing Ting, M. Itoh, Y. Kose\",\"doi\":\"10.1109/RWS.2011.5725421\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A multi-band multi-standard RFID reader SoC is described in this paper. It can be software-reconfigured to support mostly used protocols in UHF, 2.45GHz and 13.56MHz frequency bands. The single-chip reader integrates a RF transceiver, a synthesizer, ADCs/DACs and a digital baseband modem. It achieves >0dBm RX P1dB and >4dBm TX power (without external PAs) for all bands and RX sensitivity down to −72dBm for UHF band in the presence of transmitter carrier leakage. Implemented in a 90nm CMOS process, the reader occupies 3.6×3.8mm2 and consumes less than 114mW from 1.2V/3.3V supply.\",\"PeriodicalId\":250672,\"journal\":{\"name\":\"2011 IEEE Radio and Wireless Symposium\",\"volume\":\"115 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2011-03-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2011 IEEE Radio and Wireless Symposium\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/RWS.2011.5725421\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2011 IEEE Radio and Wireless Symposium","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/RWS.2011.5725421","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
A low-power UHF/13.56MHz/2.4GHz multi-standard RFID reader transceiver SoC in 90nm CMOS
A multi-band multi-standard RFID reader SoC is described in this paper. It can be software-reconfigured to support mostly used protocols in UHF, 2.45GHz and 13.56MHz frequency bands. The single-chip reader integrates a RF transceiver, a synthesizer, ADCs/DACs and a digital baseband modem. It achieves >0dBm RX P1dB and >4dBm TX power (without external PAs) for all bands and RX sensitivity down to −72dBm for UHF band in the presence of transmitter carrier leakage. Implemented in a 90nm CMOS process, the reader occupies 3.6×3.8mm2 and consumes less than 114mW from 1.2V/3.3V supply.