Sonu Kumar Mathuri, Abhishek Bhatt, S. Khan, Sandeep Shukla
{"title":"S-C波段应用的四缺口双频微带贴片天线","authors":"Sonu Kumar Mathuri, Abhishek Bhatt, S. Khan, Sandeep Shukla","doi":"10.1109/ICADEE51157.2020.9368929","DOIUrl":null,"url":null,"abstract":"In this paper S -Band and C-Band antenna has been design using shorting pins, via hole and meander type ground plan. The inductance of the geometry is optimized in this paper. The Analytical models are used for modeling of the antenna. The measurement shows Operating Impedance bandwidth achieved in S and C Band. Obtained 8% operating impedance bandwidth in S-Band and 24% operating bandwidth where |S11| • • 10 dB are obtained,. Obtained four operating notches at four operating frequencies 2.2SGHz, 2.6GHz, 3.3GHz and 4.4GHz Where return losses obtained -15dB, -25.5dB,-16dB and -31dB, respectively. This antenna can be effectively use in5G sub 6 GHz and Bluetooth and Wi-Fi bands.","PeriodicalId":202026,"journal":{"name":"2020 IEEE International Conference on Advances and Developments in Electrical and Electronics Engineering (ICADEE)","volume":"293 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2020-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Four Notch Dual Band Micro-strip Patch Antenna for S-C Band Application\",\"authors\":\"Sonu Kumar Mathuri, Abhishek Bhatt, S. Khan, Sandeep Shukla\",\"doi\":\"10.1109/ICADEE51157.2020.9368929\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper S -Band and C-Band antenna has been design using shorting pins, via hole and meander type ground plan. The inductance of the geometry is optimized in this paper. The Analytical models are used for modeling of the antenna. The measurement shows Operating Impedance bandwidth achieved in S and C Band. Obtained 8% operating impedance bandwidth in S-Band and 24% operating bandwidth where |S11| • • 10 dB are obtained,. Obtained four operating notches at four operating frequencies 2.2SGHz, 2.6GHz, 3.3GHz and 4.4GHz Where return losses obtained -15dB, -25.5dB,-16dB and -31dB, respectively. This antenna can be effectively use in5G sub 6 GHz and Bluetooth and Wi-Fi bands.\",\"PeriodicalId\":202026,\"journal\":{\"name\":\"2020 IEEE International Conference on Advances and Developments in Electrical and Electronics Engineering (ICADEE)\",\"volume\":\"293 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-12-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2020 IEEE International Conference on Advances and Developments in Electrical and Electronics Engineering (ICADEE)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICADEE51157.2020.9368929\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2020 IEEE International Conference on Advances and Developments in Electrical and Electronics Engineering (ICADEE)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICADEE51157.2020.9368929","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
摘要
本文设计了S波段和c波段天线，采用了短引脚、通孔和曲线形接地方案。本文对几何结构的电感进行了优化。采用解析模型对天线进行建模。测量显示在S和C波段实现了工作阻抗带宽。在s波段获得8%的工作阻抗带宽和24%的工作带宽，其中|S11|••10 dB。在2.2SGHz、2.6GHz、3.3GHz和4.4GHz四个工作频率下获得4个工作陷波，回波损耗分别为-15dB、-25.5dB、-16dB和-31dB。这种天线可以有效地使用5g sub - 6ghz以及蓝牙和Wi-Fi频段。
Four Notch Dual Band Micro-strip Patch Antenna for S-C Band Application
In this paper S -Band and C-Band antenna has been design using shorting pins, via hole and meander type ground plan. The inductance of the geometry is optimized in this paper. The Analytical models are used for modeling of the antenna. The measurement shows Operating Impedance bandwidth achieved in S and C Band. Obtained 8% operating impedance bandwidth in S-Band and 24% operating bandwidth where |S11| • • 10 dB are obtained,. Obtained four operating notches at four operating frequencies 2.2SGHz, 2.6GHz, 3.3GHz and 4.4GHz Where return losses obtained -15dB, -25.5dB,-16dB and -31dB, respectively. This antenna can be effectively use in5G sub 6 GHz and Bluetooth and Wi-Fi bands.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
