An Advanced Power Flow Control in Small Scale DC Power Structure by Using Multilevel Converter

Because they combine outstanding harmonic performance with low switching frequencies, multilevel transforms are attractive options in Small-Scale DC Power Ne2rks. High dependability can also be obtained by including redundant submodules into the cascaded transform chain. DC microgrids are developing as the next generation of smallscale electric power structures, with very low line impedance. This phenomena creates high currents in microgrids even with little voltage changes; hence, a power flow controller must have quick transient reaction and accurate power flow management. Multi-level transforms are used as power flow controllers in this work to provide high speed and high accuracy power flow management in a dc microgrid. Because a multi-level transform is employed, the output filter can be tiny. The linear controller, such as PI or PID, is established and widely used in the power electronics sector, but its performance degrades as system parameters change. In this paper, a neural structure (NN) based voltage management technique for a DC-DC transform is developed. This project also shows how to construct the output LC filter of a multi-level transform to meet a current ripple requirement. In comparison to typical 2-level transforms, we can demonstrate that a multilevel transform with a smaller filter may provide high-speed and high-precision power flow management for low line impedance situations. MATLAB/Simulink Simulation results are used to evaluate the control performance of each output current in the step response while accounting for transient variations in the power flow.