Comparison of synchronous generators for autonomous gasoline installation system

There are many power plants like thermal, solar, hydro, nuclear etc. but there are some disadvantage of it like CO2 emission pollution, problem of global warming requirement of fuels cost etc. To avoid such factors we developed system is biomass power plant to meet the demands of electricity and environment concern day by day price of fuels that fact to which motivate to use renewable energy. Biomass is renewable in nature, carbon neutral and has the potential to provide large productive employment in rural areas. It is considered as one of the promising sources for generation of power / energy using commercially available thermal and biological conversion technologies. The fossil fuels are depleting very fast, it is very important to replace fossil fuels with best alternative fuel modes which will be available for requirement in abundance at the same time if it is ready at one’s disposal is a eminent balance to the environment. The sanctification for this need is the bio mass power plant; on finding the major advantage of bio mass power plant is the fuel which is agricultural waste (rice husk, wood, etc.) segregation available in unnumbered tons around the world. It is very important to utilize this in the context of energy. It is also found that the sulphur content in the biomass is very less when compared with coal. The wood fuels contains very little ash (-1% or less), so increasing the ratio of wood in biomass coal blends can reduce the amount of ash that must be disposed. In biomass power plants, wood waste or other waste is burned to produce steam that runs a turbine to make electricity, or that provides heat to industries and homes. Fortunately, new technologies including pollution controls and combustion engineering have advanced to the point that any emissions from burning biomass in industrial facilities are generally less than emissions produced when using fossil fuels (coal, natural gas, oil), biomass is burned in a combustor or furnace to generate hot gas, which is fed into a boiler to generate steam, which is expanded through a steam turbine or steam engine to produce mechanical or electrical energy. In this paper were performed comparison of traditional synchronous generator with electromagnetic excitation and permanent magnet generator for autonomous gasoline installation system.