并网光伏系统的多相交错升压变换器

2016 International Conference on Microelectronics, Computing and Communications (MicroCom) Pub Date : 1900-01-01 DOI:10.1109/MICROCOM.2016.7522539

Preeti Kumari Sahu, A. Mohanty, B. Ganthia, A. Panda

{"title":"并网光伏系统的多相交错升压变换器","authors":"Preeti Kumari Sahu, A. Mohanty, B. Ganthia, A. Panda","doi":"10.1109/MICROCOM.2016.7522539","DOIUrl":null,"url":null,"abstract":"A multiphase interleaved boost converter with photovoltaic module using Maximum Power Point Tracking (MPPT) technique is the primary objective of this paper. Hence at the beginning, the PV module is analyzed in MATLAB using SIMULINK software. In this project, simulation& design of a close loop three phase inverter in MATLAB SIMULINK platform is also presented. That is also a part of PV grid connected systems. There are many MPPT methods given by the researchers. Among them P&O method and INC method are mostly used. Here P&O algorithm is used because of its advantages over INC method. P&O MPPT algorithm having faster dynamic response and well-regulated PV output voltage than hill climbing algorithm.","PeriodicalId":118902,"journal":{"name":"2016 International Conference on Microelectronics, Computing and Communications (MicroCom)","volume":"45 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"7","resultStr":"{\"title\":\"A multiphase interleaved boost converter for grid-connected PV system\",\"authors\":\"Preeti Kumari Sahu, A. Mohanty, B. Ganthia, A. Panda\",\"doi\":\"10.1109/MICROCOM.2016.7522539\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A multiphase interleaved boost converter with photovoltaic module using Maximum Power Point Tracking (MPPT) technique is the primary objective of this paper. Hence at the beginning, the PV module is analyzed in MATLAB using SIMULINK software. In this project, simulation& design of a close loop three phase inverter in MATLAB SIMULINK platform is also presented. That is also a part of PV grid connected systems. There are many MPPT methods given by the researchers. Among them P&O method and INC method are mostly used. Here P&O algorithm is used because of its advantages over INC method. P&O MPPT algorithm having faster dynamic response and well-regulated PV output voltage than hill climbing algorithm.\",\"PeriodicalId\":118902,\"journal\":{\"name\":\"2016 International Conference on Microelectronics, Computing and Communications (MicroCom)\",\"volume\":\"45 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1900-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"7\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 International Conference on Microelectronics, Computing and Communications (MicroCom)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/MICROCOM.2016.7522539\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 International Conference on Microelectronics, Computing and Communications (MicroCom)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/MICROCOM.2016.7522539","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 7

摘要

采用最大功率点跟踪(MPPT)技术的光伏组件多相交错升压变换器是本文的主要目标。因此，首先在MATLAB中使用SIMULINK软件对光伏模块进行分析。本课题还在MATLAB SIMULINK平台上对闭环三相逆变器进行了仿真设计。这也是光伏并网系统的一部分。研究者给出了许多MPPT的方法。其中P&O法和INC法应用最多。这里使用P&O算法，因为它比INC方法有优势。与爬坡算法相比，P&O MPPT算法动态响应快，光伏输出电压调节好。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

A multiphase interleaved boost converter for grid-connected PV system

A multiphase interleaved boost converter with photovoltaic module using Maximum Power Point Tracking (MPPT) technique is the primary objective of this paper. Hence at the beginning, the PV module is analyzed in MATLAB using SIMULINK software. In this project, simulation& design of a close loop three phase inverter in MATLAB SIMULINK platform is also presented. That is also a part of PV grid connected systems. There are many MPPT methods given by the researchers. Among them P&O method and INC method are mostly used. Here P&O algorithm is used because of its advantages over INC method. P&O MPPT algorithm having faster dynamic response and well-regulated PV output voltage than hill climbing algorithm.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2016 International Conference on Microelectronics, Computing and Communications (MicroCom)

自引率

0.00%

发文量