微铣削不锈钢06Cr17Ni12Mo2加工表面质量研究

2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) Pub Date : 2016-07-01 DOI:10.1109/3M-NANO.2016.7824933

Huadong Yu, H. Yuan, Jinkai Xu, Wanwu Hou, Yun Qi

{"title":"微铣削不锈钢06Cr17Ni12Mo2加工表面质量研究","authors":"Huadong Yu, H. Yuan, Jinkai Xu, Wanwu Hou, Yun Qi","doi":"10.1109/3M-NANO.2016.7824933","DOIUrl":null,"url":null,"abstract":"In this paper, the solid carbide end milling cutter was used to carry out single factor and multi factors orthogonal experiment of micro milling stainless steel 06Cr17Ni12Mo2, and the surface roughness Ra was detected. Also, SEM (Scanning Electron Microscope) was used to observe the surface burrs and the groove bottom morphology. The influence of cutting parameters (spindle speed, feed speed, axial cutting depth) on the groove bottom surface roughness were analyzed.","PeriodicalId":273846,"journal":{"name":"2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)","volume":"48 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2016-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Study on surface quality in micro milling stainless steel 06Cr17Ni12Mo2 processing\",\"authors\":\"Huadong Yu, H. Yuan, Jinkai Xu, Wanwu Hou, Yun Qi\",\"doi\":\"10.1109/3M-NANO.2016.7824933\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, the solid carbide end milling cutter was used to carry out single factor and multi factors orthogonal experiment of micro milling stainless steel 06Cr17Ni12Mo2, and the surface roughness Ra was detected. Also, SEM (Scanning Electron Microscope) was used to observe the surface burrs and the groove bottom morphology. The influence of cutting parameters (spindle speed, feed speed, axial cutting depth) on the groove bottom surface roughness were analyzed.\",\"PeriodicalId\":273846,\"journal\":{\"name\":\"2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)\",\"volume\":\"48 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2016-07-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/3M-NANO.2016.7824933\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/3M-NANO.2016.7824933","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 2

摘要

本文采用整体硬质合金立铣刀对06Cr17Ni12Mo2不锈钢进行微铣削单因素和多因素正交试验，检测表面粗糙度Ra。利用扫描电子显微镜(SEM)观察表面毛刺和槽底形貌。分析了切削参数(主轴转速、进给速度、轴向切削深度)对槽底表面粗糙度的影响。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Study on surface quality in micro milling stainless steel 06Cr17Ni12Mo2 processing

In this paper, the solid carbide end milling cutter was used to carry out single factor and multi factors orthogonal experiment of micro milling stainless steel 06Cr17Ni12Mo2, and the surface roughness Ra was detected. Also, SEM (Scanning Electron Microscope) was used to observe the surface burrs and the groove bottom morphology. The influence of cutting parameters (spindle speed, feed speed, axial cutting depth) on the groove bottom surface roughness were analyzed.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)

自引率

0.00%

发文量