普通建筑材料的中、低频电磁场传输特性

T. Koppel, Heldur Haldre, A. Shishkin, I. Hussainova, N. Toropovs, V. Mironovs, P. Tint
{"title":"普通建筑材料的中、低频电磁场传输特性","authors":"T. Koppel, Heldur Haldre, A. Shishkin, I. Hussainova, N. Toropovs, V. Mironovs, P. Tint","doi":"10.1109/RTUCON.2016.7763144","DOIUrl":null,"url":null,"abstract":"Controlling exposure to the electromagnetic fields (EMFs) may serve many causes: to protect sensitive electronic equipment from outside interference; to protect the environment from the high radiation generating equipment; to protect humans from excess radiation etc. Strong EMFs may be encountered in public domain but especially in occupational settings, where the process and technology of work requires the EMFs. Technical measures to manage risks may include using construction materials. In this study the intermediate and low radiofrequency transmission characteristics in case of building materials were investigated. The measurements are called for to determine the amplitude of the electric and magnetic field at the close proximity to the material. A set of common building materials was selected, widely used in modern constructions. The included materials can broadly be divided into three groups: load bearing materials, thermal insulation materials and cover materials. Altogether 17 building materials were tested, forming an overview of some most common materials in construction of houses. The testing was done at 2, 20 and 200 kHz frequencies. The measurement point was in close proximity (10mm) to the material under testing. The electromagnetic irradiator point was on the other side of the material, 150 mm from the measurement sensor. Somewhat frequency dependent variation in the amplification could be observed only in few cases: gypsum panel, aerated concrete, LECA, gypsum board and solid wood. The highest electric field amplification was measured for some materials, up to 5.6 dB increase: custom made gypsum panel, aerated concrete, LECA, gypsum board, high performance concrete plate, solid wood. The results show for the selected samples that semiconductive materials which cannot be grounded due to the high resistance, electric fields may be amplified several folds in close proximity to the material.","PeriodicalId":102691,"journal":{"name":"2016 57th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)","volume":"8 8 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2016-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Intermediate and low radiofrequency electromagnetic field transmission properties in case of common building materials\",\"authors\":\"T. Koppel, Heldur Haldre, A. Shishkin, I. Hussainova, N. Toropovs, V. Mironovs, P. Tint\",\"doi\":\"10.1109/RTUCON.2016.7763144\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Controlling exposure to the electromagnetic fields (EMFs) may serve many causes: to protect sensitive electronic equipment from outside interference; to protect the environment from the high radiation generating equipment; to protect humans from excess radiation etc. Strong EMFs may be encountered in public domain but especially in occupational settings, where the process and technology of work requires the EMFs. Technical measures to manage risks may include using construction materials. In this study the intermediate and low radiofrequency transmission characteristics in case of building materials were investigated. The measurements are called for to determine the amplitude of the electric and magnetic field at the close proximity to the material. A set of common building materials was selected, widely used in modern constructions. The included materials can broadly be divided into three groups: load bearing materials, thermal insulation materials and cover materials. Altogether 17 building materials were tested, forming an overview of some most common materials in construction of houses. The testing was done at 2, 20 and 200 kHz frequencies. The measurement point was in close proximity (10mm) to the material under testing. The electromagnetic irradiator point was on the other side of the material, 150 mm from the measurement sensor. Somewhat frequency dependent variation in the amplification could be observed only in few cases: gypsum panel, aerated concrete, LECA, gypsum board and solid wood. The highest electric field amplification was measured for some materials, up to 5.6 dB increase: custom made gypsum panel, aerated concrete, LECA, gypsum board, high performance concrete plate, solid wood. The results show for the selected samples that semiconductive materials which cannot be grounded due to the high resistance, electric fields may be amplified several folds in close proximity to the material.\",\"PeriodicalId\":102691,\"journal\":{\"name\":\"2016 57th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)\",\"volume\":\"8 8 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2016-10-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 57th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/RTUCON.2016.7763144\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 57th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/RTUCON.2016.7763144","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

摘要

控制暴露于电磁场(emf)可能有很多原因:保护敏感的电子设备免受外界干扰;保护环境免受高辐射发电设备的危害;保护人类免受过量辐射等。在公共领域可能会遇到强电磁场,但在工作过程和技术需要强电磁场的职业环境中尤其如此。管理风险的技术措施可能包括使用建筑材料。本文研究了建筑材料的中低频传输特性。需要进行测量以确定靠近材料的电场和磁场的振幅。选择了一套常用的建筑材料,广泛应用于现代建筑中。所包括的材料大致可分为三大类:承重材料、保温材料和覆盖材料。总共测试了17种建筑材料,形成了一些最常见的房屋建造材料的概述。测试在2,20和200khz频率下完成。测量点离被测材料很近(10mm)。电磁辐照点在材料的另一侧,距离测量传感器150mm。在某些情况下,放大的频率依赖变化只能在少数情况下观察到:石膏板、加气混凝土、LECA、石膏板和实木。对某些材料的电场放大测量最高,增加高达5.6 dB:定制石膏板,加气混凝土,LECA,石膏板,高性能混凝土板,实木。结果表明,在所选样品中,由于高电阻而不能接地的半导体材料,在靠近材料的地方,电场可能会放大几倍。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Intermediate and low radiofrequency electromagnetic field transmission properties in case of common building materials
Controlling exposure to the electromagnetic fields (EMFs) may serve many causes: to protect sensitive electronic equipment from outside interference; to protect the environment from the high radiation generating equipment; to protect humans from excess radiation etc. Strong EMFs may be encountered in public domain but especially in occupational settings, where the process and technology of work requires the EMFs. Technical measures to manage risks may include using construction materials. In this study the intermediate and low radiofrequency transmission characteristics in case of building materials were investigated. The measurements are called for to determine the amplitude of the electric and magnetic field at the close proximity to the material. A set of common building materials was selected, widely used in modern constructions. The included materials can broadly be divided into three groups: load bearing materials, thermal insulation materials and cover materials. Altogether 17 building materials were tested, forming an overview of some most common materials in construction of houses. The testing was done at 2, 20 and 200 kHz frequencies. The measurement point was in close proximity (10mm) to the material under testing. The electromagnetic irradiator point was on the other side of the material, 150 mm from the measurement sensor. Somewhat frequency dependent variation in the amplification could be observed only in few cases: gypsum panel, aerated concrete, LECA, gypsum board and solid wood. The highest electric field amplification was measured for some materials, up to 5.6 dB increase: custom made gypsum panel, aerated concrete, LECA, gypsum board, high performance concrete plate, solid wood. The results show for the selected samples that semiconductive materials which cannot be grounded due to the high resistance, electric fields may be amplified several folds in close proximity to the material.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信