复合TiO2/活性炭纤维作为光催化剂在顺序吸附/光催化过程中去除环丙沙星

Thibaut Triquet, C. Tendero, L. Latapie, R. Richard, C. Andriantsiferana
{"title":"复合TiO2/活性炭纤维作为光催化剂在顺序吸附/光催化过程中去除环丙沙星","authors":"Thibaut Triquet, C. Tendero, L. Latapie, R. Richard, C. Andriantsiferana","doi":"10.21926/cr.2201007","DOIUrl":null,"url":null,"abstract":"This work reports the performance of a sequential adsorption/photocatalysis process using activated carbon fibers with deposited TiO2 for the elimination of the antibiotic ciprofloxacin (CIP) in water. A commercial activated carbon fiber (ACF10) was selected as the support, and a TiO2 coating was synthesized using Metal Organic Chemical Vapor Deposition (MOCVD). Experiments were carried out using a photocatalytic reactor irradiated with monochromatic LEDs (365nm). Two different processes have been studied: adsorption/photolysis and adsorption/photocatalysis. The objective was to completely remove the CIP and to evaluate the efficiency of the treatment by following the formation/elimination of aromatic transformation products (ATPs), aliphatic acids, fluoride, and the TOC in the liquid phase. The adsorption kinetic of the CIP by ACF10 was rather slow (71% of CIP adsorbed by 24 h and total adsorption by 20 days). A good fit between the external diffusion limitation model and the experimental curve (kext = 0.0056 h-1) showed an external transfer limitation due to a tight weave of fibers. For the adsorption/photolysis process, a significant decrease of the concentration was achieved (95% after 6 h of irradiation), but ten different ATPs were detected in the liquid phase. To eliminate CIP, 24 h of adsorption and 6 h of irradiation were then necessary, but most of the ATPs remained in solution (total treatment duration: 72 h). With ACF10-TiO2, the same ATPs were present in solution and were eliminated after the 6 h irradiation step (total treatment duration: 30 h). At the end of the treatment, several non-toxic aliphatic acids were found to be present, showing the higher efficiency of this sequential process. The presence of a significant amount of fluorine in the liquid phase suggests some surface photochemical reactions of the adsorbed molecules (CIP and transformation products) and a partial regeneration of the composite material.","PeriodicalId":178524,"journal":{"name":"Catalysis Research","volume":"7 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2022-01-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"The Use of Composite TiO2/Activated Carbon Fibers as a Photocatalyst in a Sequential Adsorption/Photocatalysis Process for the Elimination of Ciprofloxacin\",\"authors\":\"Thibaut Triquet, C. Tendero, L. Latapie, R. Richard, C. Andriantsiferana\",\"doi\":\"10.21926/cr.2201007\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This work reports the performance of a sequential adsorption/photocatalysis process using activated carbon fibers with deposited TiO2 for the elimination of the antibiotic ciprofloxacin (CIP) in water. A commercial activated carbon fiber (ACF10) was selected as the support, and a TiO2 coating was synthesized using Metal Organic Chemical Vapor Deposition (MOCVD). Experiments were carried out using a photocatalytic reactor irradiated with monochromatic LEDs (365nm). Two different processes have been studied: adsorption/photolysis and adsorption/photocatalysis. The objective was to completely remove the CIP and to evaluate the efficiency of the treatment by following the formation/elimination of aromatic transformation products (ATPs), aliphatic acids, fluoride, and the TOC in the liquid phase. The adsorption kinetic of the CIP by ACF10 was rather slow (71% of CIP adsorbed by 24 h and total adsorption by 20 days). A good fit between the external diffusion limitation model and the experimental curve (kext = 0.0056 h-1) showed an external transfer limitation due to a tight weave of fibers. For the adsorption/photolysis process, a significant decrease of the concentration was achieved (95% after 6 h of irradiation), but ten different ATPs were detected in the liquid phase. To eliminate CIP, 24 h of adsorption and 6 h of irradiation were then necessary, but most of the ATPs remained in solution (total treatment duration: 72 h). With ACF10-TiO2, the same ATPs were present in solution and were eliminated after the 6 h irradiation step (total treatment duration: 30 h). At the end of the treatment, several non-toxic aliphatic acids were found to be present, showing the higher efficiency of this sequential process. The presence of a significant amount of fluorine in the liquid phase suggests some surface photochemical reactions of the adsorbed molecules (CIP and transformation products) and a partial regeneration of the composite material.\",\"PeriodicalId\":178524,\"journal\":{\"name\":\"Catalysis Research\",\"volume\":\"7 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-01-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Catalysis Research\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.21926/cr.2201007\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Catalysis Research","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.21926/cr.2201007","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

摘要

本文报道了活性炭纤维与沉积TiO2的顺序吸附/光催化工艺去除水中抗生素环丙沙星(CIP)的性能。选择商用活性炭纤维(ACF10)作为载体,采用金属有机化学气相沉积(MOCVD)法制备TiO2涂层。实验采用单色led (365nm)光催化反应器进行。研究了两种不同的工艺:吸附/光解和吸附/光催化。目的是完全去除CIP,并通过跟踪液相中芳香族转化产物(atp)、脂肪酸、氟化物和TOC的形成/消除来评估处理效率。ACF10对CIP的吸附动力学较慢(24 h吸附71%,20 d吸附全部)。外扩散限制模型与实验曲线(kext = 0.0056 h-1)拟合良好,表明由于纤维组织紧密,存在外转移限制。在吸附/光解过程中,浓度显著降低(照射6 h后达到95%),但在液相中检测到10种不同的atp。为了消除CIP,需要24小时的吸附和6小时的辐照,但大部分atp仍留在溶液中(总处理时间:72小时)。对于ACF10-TiO2,溶液中存在相同的atp,并在6小时的辐照步骤(总处理时间:30小时)后被消除。在处理结束时,发现存在几种无毒的脂肪酸,表明该顺序过程的效率更高。液相中存在大量氟,表明吸附分子(CIP和转化产物)发生了一些表面光化学反应,复合材料发生了部分再生。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
The Use of Composite TiO2/Activated Carbon Fibers as a Photocatalyst in a Sequential Adsorption/Photocatalysis Process for the Elimination of Ciprofloxacin
This work reports the performance of a sequential adsorption/photocatalysis process using activated carbon fibers with deposited TiO2 for the elimination of the antibiotic ciprofloxacin (CIP) in water. A commercial activated carbon fiber (ACF10) was selected as the support, and a TiO2 coating was synthesized using Metal Organic Chemical Vapor Deposition (MOCVD). Experiments were carried out using a photocatalytic reactor irradiated with monochromatic LEDs (365nm). Two different processes have been studied: adsorption/photolysis and adsorption/photocatalysis. The objective was to completely remove the CIP and to evaluate the efficiency of the treatment by following the formation/elimination of aromatic transformation products (ATPs), aliphatic acids, fluoride, and the TOC in the liquid phase. The adsorption kinetic of the CIP by ACF10 was rather slow (71% of CIP adsorbed by 24 h and total adsorption by 20 days). A good fit between the external diffusion limitation model and the experimental curve (kext = 0.0056 h-1) showed an external transfer limitation due to a tight weave of fibers. For the adsorption/photolysis process, a significant decrease of the concentration was achieved (95% after 6 h of irradiation), but ten different ATPs were detected in the liquid phase. To eliminate CIP, 24 h of adsorption and 6 h of irradiation were then necessary, but most of the ATPs remained in solution (total treatment duration: 72 h). With ACF10-TiO2, the same ATPs were present in solution and were eliminated after the 6 h irradiation step (total treatment duration: 30 h). At the end of the treatment, several non-toxic aliphatic acids were found to be present, showing the higher efficiency of this sequential process. The presence of a significant amount of fluorine in the liquid phase suggests some surface photochemical reactions of the adsorbed molecules (CIP and transformation products) and a partial regeneration of the composite material.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信