轻量化大气隙环形磁通开关永磁电机的设计

2015 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) Pub Date : 2015-03-26 DOI:10.1109/WEMDCD.2015.7194489

A. Lindner, I. Hahn

{"title":"轻量化大气隙环形磁通开关永磁电机的设计","authors":"A. Lindner, I. Hahn","doi":"10.1109/WEMDCD.2015.7194489","DOIUrl":null,"url":null,"abstract":"A toroidal wound flux-switching permanent magnet machine with large air-gap (δ = 3 mm) for a medium speed application (nominal speed n = 6000 rpm) is designed by means of 2D-Finite Element Analysis. The aim of the research is to integrate aluminum flat wire as an alternative winding type to reduce the weight as well as the high frequency winding losses of the machine. Moreover, a multi-physical approach regarding the simulation in FEMM is presented. The toroidal wound flux-switching permanent magnet machine is compared to an equally sized E-core design and pros and cons of both designs are investigated.","PeriodicalId":173358,"journal":{"name":"2015 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2015-03-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Design of a lightweight toroidal flux-switching permanent magnet machine with large air-gap\",\"authors\":\"A. Lindner, I. Hahn\",\"doi\":\"10.1109/WEMDCD.2015.7194489\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A toroidal wound flux-switching permanent magnet machine with large air-gap (δ = 3 mm) for a medium speed application (nominal speed n = 6000 rpm) is designed by means of 2D-Finite Element Analysis. The aim of the research is to integrate aluminum flat wire as an alternative winding type to reduce the weight as well as the high frequency winding losses of the machine. Moreover, a multi-physical approach regarding the simulation in FEMM is presented. The toroidal wound flux-switching permanent magnet machine is compared to an equally sized E-core design and pros and cons of both designs are investigated.\",\"PeriodicalId\":173358,\"journal\":{\"name\":\"2015 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD)\",\"volume\":\"1 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2015-03-26\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2015 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/WEMDCD.2015.7194489\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2015 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/WEMDCD.2015.7194489","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

采用二维有限元分析的方法，设计了一种中速(公称转速n = 6000转/分)大气隙(δ = 3mm)环形绕线磁通开关永磁电机。这项研究的目的是整合铝扁线作为一种替代绕组类型，以减少重量以及机器的高频绕组损耗。在此基础上，提出了一种多物理场仿真方法。将环形绕线磁通开关永磁电机与同等尺寸的e磁芯设计进行了比较，并对两种设计的优缺点进行了研究。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Design of a lightweight toroidal flux-switching permanent magnet machine with large air-gap

A toroidal wound flux-switching permanent magnet machine with large air-gap (δ = 3 mm) for a medium speed application (nominal speed n = 6000 rpm) is designed by means of 2D-Finite Element Analysis. The aim of the research is to integrate aluminum flat wire as an alternative winding type to reduce the weight as well as the high frequency winding losses of the machine. Moreover, a multi-physical approach regarding the simulation in FEMM is presented. The toroidal wound flux-switching permanent magnet machine is compared to an equally sized E-core design and pros and cons of both designs are investigated.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2015 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD)

自引率

0.00%

发文量