Zhang Lei, Zhao Xian-li, Wang Xing-hua, Qu Ruo-yuan
{"title":"基于SC技术的二阶低功耗σ - δ调制器","authors":"Zhang Lei, Zhao Xian-li, Wang Xing-hua, Qu Ruo-yuan","doi":"10.1109/SMELEC.2010.5549418","DOIUrl":null,"url":null,"abstract":"This paper presents a sigma-delta modulator of two-order with switched-capacitors (SC) techniques for low power in 0.18um CMOS process. Without continues current transmission SC techniques present a discrete low power system. And a low power op amplifier with discrete common-mode feedback and a dynamic comparator is also designed. This new amp works under the supply of 1.8v and with the direct current of 200uA. The tool Matlab is used to simulate the behavior system, while Cadence is used to design the circuit and the layout in 0.18 um CMOS (1.8v model) process. The modulator achieves 81dB dynamic range in 24-kHz signal bandwidth with OSR=128. And it consumes 0.8mW under 1.8v supply voltage.","PeriodicalId":308501,"journal":{"name":"2010 IEEE International Conference on Semiconductor Electronics (ICSE2010)","volume":"135 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2010-06-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"4","resultStr":"{\"title\":\"Two-order low-power sigma-delta modulator with SC techniques\",\"authors\":\"Zhang Lei, Zhao Xian-li, Wang Xing-hua, Qu Ruo-yuan\",\"doi\":\"10.1109/SMELEC.2010.5549418\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents a sigma-delta modulator of two-order with switched-capacitors (SC) techniques for low power in 0.18um CMOS process. Without continues current transmission SC techniques present a discrete low power system. And a low power op amplifier with discrete common-mode feedback and a dynamic comparator is also designed. This new amp works under the supply of 1.8v and with the direct current of 200uA. The tool Matlab is used to simulate the behavior system, while Cadence is used to design the circuit and the layout in 0.18 um CMOS (1.8v model) process. The modulator achieves 81dB dynamic range in 24-kHz signal bandwidth with OSR=128. And it consumes 0.8mW under 1.8v supply voltage.\",\"PeriodicalId\":308501,\"journal\":{\"name\":\"2010 IEEE International Conference on Semiconductor Electronics (ICSE2010)\",\"volume\":\"135 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2010-06-28\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"4\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2010 IEEE International Conference on Semiconductor Electronics (ICSE2010)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/SMELEC.2010.5549418\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2010 IEEE International Conference on Semiconductor Electronics (ICSE2010)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/SMELEC.2010.5549418","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 4
摘要
本文提出了一种采用开关电容(SC)技术的低功耗二阶σ - δ调制器,用于0.18um CMOS工艺。无连续电流传输的SC技术是一种离散的低功率系统。设计了具有离散共模反馈和动态比较器的低功率运算放大器。这种新型放大器在1.8v的电源下工作,直流电为200uA。利用Matlab工具对系统行为进行仿真,利用Cadence在0.18 um CMOS (1.8v模型)工艺下进行电路设计和布局。该调制器在24khz信号带宽下实现81dB动态范围,OSR=128。电源电压为1.8v时,功耗为0.8mW。
Two-order low-power sigma-delta modulator with SC techniques
This paper presents a sigma-delta modulator of two-order with switched-capacitors (SC) techniques for low power in 0.18um CMOS process. Without continues current transmission SC techniques present a discrete low power system. And a low power op amplifier with discrete common-mode feedback and a dynamic comparator is also designed. This new amp works under the supply of 1.8v and with the direct current of 200uA. The tool Matlab is used to simulate the behavior system, while Cadence is used to design the circuit and the layout in 0.18 um CMOS (1.8v model) process. The modulator achieves 81dB dynamic range in 24-kHz signal bandwidth with OSR=128. And it consumes 0.8mW under 1.8v supply voltage.