连接设计对大功率重叠螺栓连接接触电阻的影响

Proceedings of the Forth-Seventh IEEE Holm Conference on Electrical Contacts (IEEE Cat. No.01CH37192) Pub Date : 2001-09-10 DOI:10.1109/HOLM.2001.953215

M. Braunovic

{"title":"连接设计对大功率重叠螺栓连接接触电阻的影响","authors":"M. Braunovic","doi":"10.1109/HOLM.2001.953215","DOIUrl":null,"url":null,"abstract":"The effect of design changes on the contact resistance of overlapping bolted/pad joints was investigated. It was found that slanting the edges of the bus-bars/pads under 45/spl deg/ and making slots in the overlapping areas significantly reduce the contact resistance of a joint and improve its mechanical integrity. These improvements are results of enlarged contact area and creation of a uniform current distribution at the contact interface.","PeriodicalId":136044,"journal":{"name":"Proceedings of the Forth-Seventh IEEE Holm Conference on Electrical Contacts (IEEE Cat. No.01CH37192)","volume":"21 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2001-09-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"48","resultStr":"{\"title\":\"Effect of connection design on the contact resistance of high power overlapping bolted joints\",\"authors\":\"M. Braunovic\",\"doi\":\"10.1109/HOLM.2001.953215\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The effect of design changes on the contact resistance of overlapping bolted/pad joints was investigated. It was found that slanting the edges of the bus-bars/pads under 45/spl deg/ and making slots in the overlapping areas significantly reduce the contact resistance of a joint and improve its mechanical integrity. These improvements are results of enlarged contact area and creation of a uniform current distribution at the contact interface.\",\"PeriodicalId\":136044,\"journal\":{\"name\":\"Proceedings of the Forth-Seventh IEEE Holm Conference on Electrical Contacts (IEEE Cat. No.01CH37192)\",\"volume\":\"21 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2001-09-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"48\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Proceedings of the Forth-Seventh IEEE Holm Conference on Electrical Contacts (IEEE Cat. No.01CH37192)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/HOLM.2001.953215\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of the Forth-Seventh IEEE Holm Conference on Electrical Contacts (IEEE Cat. No.01CH37192)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/HOLM.2001.953215","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 48

摘要

研究了设计变化对螺栓/垫块重叠连接接触电阻的影响。结果表明，将母线/焊盘边缘倾斜至45/spl度/以下，并在重叠区域开槽，可显著降低接头的接触电阻，提高接头的机械完整性。这些改进是接触面积扩大和在接触界面产生均匀电流分布的结果。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Effect of connection design on the contact resistance of high power overlapping bolted joints

The effect of design changes on the contact resistance of overlapping bolted/pad joints was investigated. It was found that slanting the edges of the bus-bars/pads under 45/spl deg/ and making slots in the overlapping areas significantly reduce the contact resistance of a joint and improve its mechanical integrity. These improvements are results of enlarged contact area and creation of a uniform current distribution at the contact interface.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Proceedings of the Forth-Seventh IEEE Holm Conference on Electrical Contacts (IEEE Cat. No.01CH37192)

自引率

0.00%

发文量