一种嵌入微带线馈电的单层宽带低轮廓齿状槽微带贴片天线

Wenwen Yang, Jianyi Zhou
{"title":"一种嵌入微带线馈电的单层宽带低轮廓齿状槽微带贴片天线","authors":"Wenwen Yang, Jianyi Zhou","doi":"10.1109/IWAT.2013.6518342","DOIUrl":null,"url":null,"abstract":"A technique to design a wideband low profile microstrip patch antenna is presented in this paper. The proposed antenna consists of a tooth-like-slot patch and an inset feeding microstrip line. Two resonant modes are excited to broaden the bandwidth with the total substrate thickness of only 0.033λ0. The antenna and a 2×2 array operating at 10GHz are fabricated with printed circuit board process. The prototypes with single element achieve a bandwidth of 10.5% for -10dB return loss and a gain of 9.4dBi while the 2×2 array achieve a bandwidth of 10.6% and a gain of 15.1dBi. The proposed antenna exhibits low profile, low fabrication cost, easy integration with planar circuits and still retains the advantages of high gain and wideband.","PeriodicalId":247542,"journal":{"name":"2013 International Workshop on Antenna Technology (iWAT)","volume":"68 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2013-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"5","resultStr":"{\"title\":\"A single layer wideband low profile tooth-like-slot microstrip patch antenna fed by inset microstrip line\",\"authors\":\"Wenwen Yang, Jianyi Zhou\",\"doi\":\"10.1109/IWAT.2013.6518342\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A technique to design a wideband low profile microstrip patch antenna is presented in this paper. The proposed antenna consists of a tooth-like-slot patch and an inset feeding microstrip line. Two resonant modes are excited to broaden the bandwidth with the total substrate thickness of only 0.033λ0. The antenna and a 2×2 array operating at 10GHz are fabricated with printed circuit board process. The prototypes with single element achieve a bandwidth of 10.5% for -10dB return loss and a gain of 9.4dBi while the 2×2 array achieve a bandwidth of 10.6% and a gain of 15.1dBi. The proposed antenna exhibits low profile, low fabrication cost, easy integration with planar circuits and still retains the advantages of high gain and wideband.\",\"PeriodicalId\":247542,\"journal\":{\"name\":\"2013 International Workshop on Antenna Technology (iWAT)\",\"volume\":\"68 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2013-03-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"5\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2013 International Workshop on Antenna Technology (iWAT)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/IWAT.2013.6518342\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2013 International Workshop on Antenna Technology (iWAT)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/IWAT.2013.6518342","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 5

摘要

本文提出了一种宽带低轮廓微带贴片天线的设计方法。所提出的天线由齿状缝隙贴片和插入馈电微带线组成。在衬底总厚度仅为0.033λ0的情况下,激发两种谐振模式以拓宽带宽。天线和工作频率为10GHz的2×2阵列采用印刷电路板工艺制作。单元件原型的带宽为10.5%,回波损耗为-10dB,增益为9.4dBi,而2×2阵列的带宽为10.6%,增益为15.1dBi。该天线外形小巧,制造成本低,易于与平面电路集成,同时保持了高增益和宽带的优点。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
A single layer wideband low profile tooth-like-slot microstrip patch antenna fed by inset microstrip line
A technique to design a wideband low profile microstrip patch antenna is presented in this paper. The proposed antenna consists of a tooth-like-slot patch and an inset feeding microstrip line. Two resonant modes are excited to broaden the bandwidth with the total substrate thickness of only 0.033λ0. The antenna and a 2×2 array operating at 10GHz are fabricated with printed circuit board process. The prototypes with single element achieve a bandwidth of 10.5% for -10dB return loss and a gain of 9.4dBi while the 2×2 array achieve a bandwidth of 10.6% and a gain of 15.1dBi. The proposed antenna exhibits low profile, low fabrication cost, easy integration with planar circuits and still retains the advantages of high gain and wideband.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信