World's First Advanced Dual ESP System Deployment for Harsh Environment

A Dual ESP system is a redundant ESP concept that provides backup ESP system to be put on stream immediately if the primary ESP fails, which minimizes workover ESP replacement requirements and cost. An enhanced Dual ESP system for a harsh environment is installed to prolong ESP run life. These harsh environment Dual ESP system are equipped with full Metal-to-Metal Motor Lead Extension as well as H2S Scavenger seal sections on both upper and lower pumps to enhance their durability. Moreover, auto-check valves are included in the system to enhance dual ESP daily operation and maintenance. This paper will share the new dual ESP system design for harsh environments, enhancements, and successful applications in offshore fields. Two identical, complete, and independent ESP systems are installed with standard Y-Tool (bypass system). All if which was achieved by installing the Metal-to-Metal Motor Lead Extension (MLE) Dual ESP application which acts as backup ESP system to be put on stream immediately after the primary ESP fails. Thus, avails the well potential and postpones the requirement of workover rig mobilization to replace failed ESP. Backup dual-ESP system extend overall ESP system run life in areas with limited rig availability. The cutting-edge technologies that were deployed in this completion include: Metal to Metal MLE on both lower and upper ESPs, which proved the increase in the run life compared to the standard MLE. Severe Service Seals (H2S Scavenger Seals), which protects the motor from corrosive subsurface elements. Dual Y-Tools to allow reservoir intervention below the ESP through bypass for logging, acid job and any Wireline / Coil Tubing jobs needed. Non-Return Valve (NRV) which facilitate auto switching between the upper and lower ESPs eliminating the costly offshore barge and wireline conventionally required to install isolation sleeves and blanking plugs. Dual penetration bore Aflas Packer which allows using two cable penetrators and has an Aflas material for sour applications. This paper will provide in-depth information about each of the cutting-edge technologies deployed in this completion along with the added technical value of utilization. It will further provide the estimated significant cost avoidance achieved in offshore ESP fields following the deployment of this completion.