{"title":"一种带电流模半数字重构滤波器的CMOS过采样D/A转换器","authors":"D. Su, B. Wooley","doi":"10.1109/ISSCC.1993.280036","DOIUrl":null,"url":null,"abstract":"The architecture of an oversampling D/A (digital-to-analog) converter is shown. A 16-b digital word at the Nyquist sampling rate of 44.1 kHz is unsampled to 7.58 MHz by a digital interpolator. These 16-b data are then quantized into a one-bit output by a digital second-order sigma-delta modulation noise shaper. Instead of converting the one-bit output of the noise shaper into a two-level analog signal, the one-bit code is processed by a semi-digital reconstruction filter that provides both analog reconstruction filtering and D/A conversion. A prototype D/A converter consisting of a second-order digital noise shaper and a 128-tap semi-digital reconstruction filter was fabricated in 1- mu m CMOS in an active area of about 2.5 mm/sup 2/. The simulated frequency spectrum of the analog output is shown for a 4.74-kHz sinusoidal input 10 dB below overload with an oversampling ratio of 172. The reconstruction filter reduces by 61 dB the total out-of-band power between 22.1 kHz and 3.79 MHz. Also shown is the measured signal-to-(noise+distortion) of the converter as a function of input signal level for a baseband of 22.1 kHz. Measurements indicate a dynamic range of 95 dB with a peak signal-to-(noise+distortion) ratio of 85 dB.<<ETX>>","PeriodicalId":186531,"journal":{"name":"1993 IEEE International Solid-State Circuits Conference Digest of Technical Papers","volume":"145 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1993-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"98","resultStr":"{\"title\":\"A CMOS oversampling D/A converter with a current-mode semi-digital reconstruction filter\",\"authors\":\"D. Su, B. Wooley\",\"doi\":\"10.1109/ISSCC.1993.280036\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The architecture of an oversampling D/A (digital-to-analog) converter is shown. A 16-b digital word at the Nyquist sampling rate of 44.1 kHz is unsampled to 7.58 MHz by a digital interpolator. These 16-b data are then quantized into a one-bit output by a digital second-order sigma-delta modulation noise shaper. Instead of converting the one-bit output of the noise shaper into a two-level analog signal, the one-bit code is processed by a semi-digital reconstruction filter that provides both analog reconstruction filtering and D/A conversion. A prototype D/A converter consisting of a second-order digital noise shaper and a 128-tap semi-digital reconstruction filter was fabricated in 1- mu m CMOS in an active area of about 2.5 mm/sup 2/. The simulated frequency spectrum of the analog output is shown for a 4.74-kHz sinusoidal input 10 dB below overload with an oversampling ratio of 172. The reconstruction filter reduces by 61 dB the total out-of-band power between 22.1 kHz and 3.79 MHz. Also shown is the measured signal-to-(noise+distortion) of the converter as a function of input signal level for a baseband of 22.1 kHz. Measurements indicate a dynamic range of 95 dB with a peak signal-to-(noise+distortion) ratio of 85 dB.<<ETX>>\",\"PeriodicalId\":186531,\"journal\":{\"name\":\"1993 IEEE International Solid-State Circuits Conference Digest of Technical Papers\",\"volume\":\"145 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1993-12-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"98\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"1993 IEEE International Solid-State Circuits Conference Digest of Technical Papers\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ISSCC.1993.280036\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"1993 IEEE International Solid-State Circuits Conference Digest of Technical Papers","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ISSCC.1993.280036","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
A CMOS oversampling D/A converter with a current-mode semi-digital reconstruction filter
The architecture of an oversampling D/A (digital-to-analog) converter is shown. A 16-b digital word at the Nyquist sampling rate of 44.1 kHz is unsampled to 7.58 MHz by a digital interpolator. These 16-b data are then quantized into a one-bit output by a digital second-order sigma-delta modulation noise shaper. Instead of converting the one-bit output of the noise shaper into a two-level analog signal, the one-bit code is processed by a semi-digital reconstruction filter that provides both analog reconstruction filtering and D/A conversion. A prototype D/A converter consisting of a second-order digital noise shaper and a 128-tap semi-digital reconstruction filter was fabricated in 1- mu m CMOS in an active area of about 2.5 mm/sup 2/. The simulated frequency spectrum of the analog output is shown for a 4.74-kHz sinusoidal input 10 dB below overload with an oversampling ratio of 172. The reconstruction filter reduces by 61 dB the total out-of-band power between 22.1 kHz and 3.79 MHz. Also shown is the measured signal-to-(noise+distortion) of the converter as a function of input signal level for a baseband of 22.1 kHz. Measurements indicate a dynamic range of 95 dB with a peak signal-to-(noise+distortion) ratio of 85 dB.<>