串联电机四象限驱动直流斩波器第二部分:带直流控制的驱动和反转模式

2016 IEEE International Conference on Power and Energy (PECon) Pub Date : 2016-11-01 DOI:10.1109/PECON.2016.7951663

S. Arof, J. A. Jalil, N. S. Kamaruddin, N. M. Yaakop, P. Mawby, A. Hamzah

{"title":"串联电机四象限驱动直流斩波器第二部分:带直流控制的驱动和反转模式","authors":"S. Arof, J. A. Jalil, N. S. Kamaruddin, N. M. Yaakop, P. Mawby, A. Hamzah","doi":"10.1109/PECON.2016.7951663","DOIUrl":null,"url":null,"abstract":"This paper describes the operation of a Four Quadrant DC Chopper (FQDC) for Drive and Reverse modes of a series DC motor using Direct Current Control (DCC) method. The method is mathematically modelled and simulated using MATLAB/SIMULINK. An experimental set-up has been performed to verify both mathematical and simulation models. Results demonstrated that there is a strong agreement in terms of motor speed and current pattern between both models, hence proved that the DCC method has been successfully implemented in the FQDC.","PeriodicalId":259969,"journal":{"name":"2016 IEEE International Conference on Power and Energy (PECon)","volume":"7 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"18","resultStr":"{\"title\":\"Series motor four quadrants drive DC Chopper part2: Driving and reverse mode with direct current control\",\"authors\":\"S. Arof, J. A. Jalil, N. S. Kamaruddin, N. M. Yaakop, P. Mawby, A. Hamzah\",\"doi\":\"10.1109/PECON.2016.7951663\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper describes the operation of a Four Quadrant DC Chopper (FQDC) for Drive and Reverse modes of a series DC motor using Direct Current Control (DCC) method. The method is mathematically modelled and simulated using MATLAB/SIMULINK. An experimental set-up has been performed to verify both mathematical and simulation models. Results demonstrated that there is a strong agreement in terms of motor speed and current pattern between both models, hence proved that the DCC method has been successfully implemented in the FQDC.\",\"PeriodicalId\":259969,\"journal\":{\"name\":\"2016 IEEE International Conference on Power and Energy (PECon)\",\"volume\":\"7 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2016-11-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"18\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 IEEE International Conference on Power and Energy (PECon)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/PECON.2016.7951663\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 IEEE International Conference on Power and Energy (PECon)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/PECON.2016.7951663","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 18

摘要

本文介绍了采用直流控制(Direct Current Control, DCC)方法的四象限直流斩波器(FQDC)对串联直流电机的驱动和反转模式的工作原理。利用MATLAB/SIMULINK对该方法进行了数学建模和仿真。通过实验装置对数学模型和仿真模型进行了验证。结果表明，两种模型在电机速度和电流模式方面有很强的一致性，从而证明DCC方法已成功地在FQDC中实现。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Series motor four quadrants drive DC Chopper part2: Driving and reverse mode with direct current control

This paper describes the operation of a Four Quadrant DC Chopper (FQDC) for Drive and Reverse modes of a series DC motor using Direct Current Control (DCC) method. The method is mathematically modelled and simulated using MATLAB/SIMULINK. An experimental set-up has been performed to verify both mathematical and simulation models. Results demonstrated that there is a strong agreement in terms of motor speed and current pattern between both models, hence proved that the DCC method has been successfully implemented in the FQDC.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2016 IEEE International Conference on Power and Energy (PECon)

自引率

0.00%

发文量