基于服务描述过程的分层服务软件生成

IEEE International Conference on Communications, Including Supercomm Technical Sessions Pub Date : 1990-04-16 DOI:10.1109/ICC.1990.117100

O. Mizuno, Y. Niitsu

{"title":"基于服务描述过程的分层服务软件生成","authors":"O. Mizuno, Y. Niitsu","doi":"10.1109/ICC.1990.117100","DOIUrl":null,"url":null,"abstract":"The authors propose that, in developing service software, the planning and design phase be divided into three steps: a general specification description, a signal specification description, and a nodal processing description. A specification conversion system which allows the automatic conversion of the general specification to the nodal processing specification through the signal specification, and a user-friendly development environment which allows a graphic and computer-aided specification description are developed. The service software that is generated from the nodal processing specification description can be executed on a general-purpose computer that controls a PABX (private automatic branch exchange). The prototype system for evaluation of the layered service software generation automation method is discussed.<<ETX>>","PeriodicalId":126008,"journal":{"name":"IEEE International Conference on Communications, Including Supercomm Technical Sessions","volume":"23 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1990-04-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Layered service software generation based on service description procedures\",\"authors\":\"O. Mizuno, Y. Niitsu\",\"doi\":\"10.1109/ICC.1990.117100\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The authors propose that, in developing service software, the planning and design phase be divided into three steps: a general specification description, a signal specification description, and a nodal processing description. A specification conversion system which allows the automatic conversion of the general specification to the nodal processing specification through the signal specification, and a user-friendly development environment which allows a graphic and computer-aided specification description are developed. The service software that is generated from the nodal processing specification description can be executed on a general-purpose computer that controls a PABX (private automatic branch exchange). The prototype system for evaluation of the layered service software generation automation method is discussed.<<ETX>>\",\"PeriodicalId\":126008,\"journal\":{\"name\":\"IEEE International Conference on Communications, Including Supercomm Technical Sessions\",\"volume\":\"23 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1990-04-16\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"IEEE International Conference on Communications, Including Supercomm Technical Sessions\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICC.1990.117100\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE International Conference on Communications, Including Supercomm Technical Sessions","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICC.1990.117100","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 2

摘要

作者建议，在开发业务软件时，将规划和设计阶段分为三个步骤:通用规范描述、信号规范描述和节点处理描述。开发了通过信号规范自动将通用规范转换为节点处理规范的规范转换系统，以及允许图形化和计算机辅助规范描述的用户友好开发环境。由节点处理规范描述生成的服务软件可以在控制专用自动交换机(PABX)的通用计算机上执行。讨论了评价分层服务软件生成自动化方法的原型系统。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Layered service software generation based on service description procedures

The authors propose that, in developing service software, the planning and design phase be divided into three steps: a general specification description, a signal specification description, and a nodal processing description. A specification conversion system which allows the automatic conversion of the general specification to the nodal processing specification through the signal specification, and a user-friendly development environment which allows a graphic and computer-aided specification description are developed. The service software that is generated from the nodal processing specification description can be executed on a general-purpose computer that controls a PABX (private automatic branch exchange). The prototype system for evaluation of the layered service software generation automation method is discussed.<>

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

IEEE International Conference on Communications, Including Supercomm Technical Sessions

自引率

0.00%

发文量