Cuk变换器控制系统设计中的滑模和时标

2016 17th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM) Pub Date : 2016-06-01 DOI:10.1109/EDM.2016.7538765

E. Aksenov, V. Yurkevich

{"title":"Cuk变换器控制系统设计中的滑模和时标","authors":"E. Aksenov, V. Yurkevich","doi":"10.1109/EDM.2016.7538765","DOIUrl":null,"url":null,"abstract":"An approach to control system design for a Cuk converter is presented where cascade control system structure involves three control loops. The inner control loop is designed based on sliding mode control in order to provide desired value of input current. The second control loop allows maintaining the regulation of the voltage of transferring energy capacitor. The proportional-integral (PI) controller is used in the second control loop. The last outer control loop regulates the output voltage of the Cuk converter by integral (I) controller. The time-scale separation technique is applied for selection of PI controller parameters. Simulation results of the closed-loop control system are presented based on Matlab/Simulink Tools.","PeriodicalId":353623,"journal":{"name":"2016 17th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM)","volume":"30 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2016-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"6","resultStr":"{\"title\":\"Sliding mode and time-scales in control system design for a Cuk converter\",\"authors\":\"E. Aksenov, V. Yurkevich\",\"doi\":\"10.1109/EDM.2016.7538765\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"An approach to control system design for a Cuk converter is presented where cascade control system structure involves three control loops. The inner control loop is designed based on sliding mode control in order to provide desired value of input current. The second control loop allows maintaining the regulation of the voltage of transferring energy capacitor. The proportional-integral (PI) controller is used in the second control loop. The last outer control loop regulates the output voltage of the Cuk converter by integral (I) controller. The time-scale separation technique is applied for selection of PI controller parameters. Simulation results of the closed-loop control system are presented based on Matlab/Simulink Tools.\",\"PeriodicalId\":353623,\"journal\":{\"name\":\"2016 17th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM)\",\"volume\":\"30 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2016-06-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"6\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 17th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/EDM.2016.7538765\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 17th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/EDM.2016.7538765","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 6

摘要

提出了一种由三个控制回路组成的串级控制系统结构的Cuk变换器控制系统设计方法。内部控制回路基于滑模控制设计，以提供所需的输入电流值。第二控制回路允许维持转移能量电容器的电压调节。第二控制回路采用比例积分(PI)控制器。最后一个外部控制环通过积分(I)控制器调节Cuk变换器的输出电压。采用时标分离技术选择PI控制器参数。给出了基于Matlab/Simulink工具的闭环控制系统仿真结果。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Sliding mode and time-scales in control system design for a Cuk converter

An approach to control system design for a Cuk converter is presented where cascade control system structure involves three control loops. The inner control loop is designed based on sliding mode control in order to provide desired value of input current. The second control loop allows maintaining the regulation of the voltage of transferring energy capacitor. The proportional-integral (PI) controller is used in the second control loop. The last outer control loop regulates the output voltage of the Cuk converter by integral (I) controller. The time-scale separation technique is applied for selection of PI controller parameters. Simulation results of the closed-loop control system are presented based on Matlab/Simulink Tools.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2016 17th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM)

自引率

0.00%

发文量