自动化系统用交换以太网的测量

2000 IEEE International Workshop on Factory Communication Systems. Proceedings (Cat. No.00TH8531) Pub Date : 2000-09-06 DOI:10.1109/WFCS.2000.882554

E. Vonnahme, S. Ruping, U. Ruckert

{"title":"自动化系统用交换以太网的测量","authors":"E. Vonnahme, S. Ruping, U. Ruckert","doi":"10.1109/WFCS.2000.882554","DOIUrl":null,"url":null,"abstract":"Ethernet networks for automation systems promise standardized interworking between completely different devices from field level up to office level without connection and conversion difficulties. As Ethernet was not originally developed considering automation system requirements, its qualification, especially regarding topology and determinism demands, has to be examined. Theoretical calculations on topology influence are completed by measurements on switch hardware. A special software for configuring, monitoring and testing the switch hardware was developed. Further experiments for the evaluation of the Ethernet Medium Access Control Pause operation in automation systems are also described.","PeriodicalId":112914,"journal":{"name":"2000 IEEE International Workshop on Factory Communication Systems. Proceedings (Cat. No.00TH8531)","volume":"5 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2000-09-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"26","resultStr":"{\"title\":\"Measurements in switched Ethernet networks used for automation systems\",\"authors\":\"E. Vonnahme, S. Ruping, U. Ruckert\",\"doi\":\"10.1109/WFCS.2000.882554\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Ethernet networks for automation systems promise standardized interworking between completely different devices from field level up to office level without connection and conversion difficulties. As Ethernet was not originally developed considering automation system requirements, its qualification, especially regarding topology and determinism demands, has to be examined. Theoretical calculations on topology influence are completed by measurements on switch hardware. A special software for configuring, monitoring and testing the switch hardware was developed. Further experiments for the evaluation of the Ethernet Medium Access Control Pause operation in automation systems are also described.\",\"PeriodicalId\":112914,\"journal\":{\"name\":\"2000 IEEE International Workshop on Factory Communication Systems. Proceedings (Cat. No.00TH8531)\",\"volume\":\"5 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2000-09-06\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"26\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2000 IEEE International Workshop on Factory Communication Systems. Proceedings (Cat. No.00TH8531)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/WFCS.2000.882554\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2000 IEEE International Workshop on Factory Communication Systems. Proceedings (Cat. No.00TH8531)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/WFCS.2000.882554","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 26

摘要

用于自动化系统的以太网承诺在从现场级到办公室级的完全不同的设备之间进行标准化的互连，而没有连接和转换的困难。由于以太网最初并没有考虑到自动化系统的需求，因此必须检查其资格，特别是关于拓扑和确定性需求。通过对交换机硬件的测量，完成了拓扑影响的理论计算。开发了用于交换机硬件配置、监控和测试的专用软件。对自动化系统中以太网介质访问控制暂停操作的评价进行了进一步的实验。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Measurements in switched Ethernet networks used for automation systems

Ethernet networks for automation systems promise standardized interworking between completely different devices from field level up to office level without connection and conversion difficulties. As Ethernet was not originally developed considering automation system requirements, its qualification, especially regarding topology and determinism demands, has to be examined. Theoretical calculations on topology influence are completed by measurements on switch hardware. A special software for configuring, monitoring and testing the switch hardware was developed. Further experiments for the evaluation of the Ethernet Medium Access Control Pause operation in automation systems are also described.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2000 IEEE International Workshop on Factory Communication Systems. Proceedings (Cat. No.00TH8531)

自引率

0.00%

发文量