Electric field transformation effect in anisotropic dielectric medium

The authors consider the aspects of the electric field distribution in an anisotropic medium and establish how its longitudinal and transverse components depend on the geometric factors. A rectangular plate of dimensions a×b×c is studied, its selected crystallographic axes located in the plane of the side face (a×b), while one of the axes is oriented at a certain angle α to the edge a. It is shown that applying a certain potential difference to the upper and lower faces electrically polarizes the volume of the plate and causes the appearance of the longitudinal and transverse components of the internal electric field. The authors investigate the possibility of transforming the magnitude of the electric field and methods for its optimization. The transformation coefficient of such a device is determined by the anisotropy of the dielectric permeability of the plate material and its shape coefficient k = a/b. The paper considers one of the design options for an anisotropic dielectric transformer and proposes its equivalent electrical circuit. Structural elements based on anisotropic dielectric transformers may be widely used both in power supplies of various electronic devices and for coordination of radar transceiver systems with antenna arrays of centimeter, millimeter and submillimeter wavelength ranges. The possibility of simultaneous transformation of constant and alternating electric fields allows them to be used in devices of simultaneous comparison, enabling to determine the current values of voltage, as well as the power of electromagnetic radiation in a wide range of wavelengths. The vortex nature of the electric field in the plate’s volume caused by the coefficient anisotropy of the dielectric permeability also creates the preconditions for the emergence of new principles for generating high-power electromagnetic radiation in a wide spectral range. The generation frequency of such devices is determined by the geometric dimensions of the anisotropic plate. The use of the described transformation effect will significantly expand the possibilities of practical application of the considered electrostatic phenomena, which will lead to the emergence of a new generation of devices for microwave technology, electronics and electric power.