基于ANSYS workbench的微铣削系统动力学分析

2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) Pub Date : 2016-07-01 DOI:10.1109/3M-NANO.2016.7824934

Jinkai Xu, Zeng Ren, Huanhuan Ren, Huadong Yu, Zhanjiang Yu

{"title":"基于ANSYS workbench的微铣削系统动力学分析","authors":"Jinkai Xu, Zeng Ren, Huanhuan Ren, Huadong Yu, Zhanjiang Yu","doi":"10.1109/3M-NANO.2016.7824934","DOIUrl":null,"url":null,"abstract":"The dynamic characteristic of the machine tool has a very important influence on the quality of the workpiece. In particular, the high speed micro milling process puts forward higher requirements for dynamic characteristics. We take the micro-milling system as the research object and use ANSYS Workbench to establish the 3D solid model of the micro-cutting system, then simplify it. Using workbench ANSYS to carry on the static analysis, the modal analysis and Harmonic response to the micro-milling system, the weak link of the micro-milling system is pointed out, which provides guidance for the further optimization.","PeriodicalId":273846,"journal":{"name":"2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)","volume":"9 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2016-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Dynamic analysis of the micro-milling system based on ANSYS workbench\",\"authors\":\"Jinkai Xu, Zeng Ren, Huanhuan Ren, Huadong Yu, Zhanjiang Yu\",\"doi\":\"10.1109/3M-NANO.2016.7824934\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The dynamic characteristic of the machine tool has a very important influence on the quality of the workpiece. In particular, the high speed micro milling process puts forward higher requirements for dynamic characteristics. We take the micro-milling system as the research object and use ANSYS Workbench to establish the 3D solid model of the micro-cutting system, then simplify it. Using workbench ANSYS to carry on the static analysis, the modal analysis and Harmonic response to the micro-milling system, the weak link of the micro-milling system is pointed out, which provides guidance for the further optimization.\",\"PeriodicalId\":273846,\"journal\":{\"name\":\"2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)\",\"volume\":\"9 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2016-07-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/3M-NANO.2016.7824934\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/3M-NANO.2016.7824934","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

机床的动态特性对工件的质量有非常重要的影响。特别是高速微铣削过程对动态特性提出了更高的要求。以微铣削系统为研究对象，利用ANSYS Workbench建立微铣削系统的三维实体模型，并对其进行简化。利用workbench ANSYS对微铣削系统进行静力分析、模态分析和谐波响应分析，指出微铣削系统的薄弱环节，为进一步优化提供指导。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Dynamic analysis of the micro-milling system based on ANSYS workbench

The dynamic characteristic of the machine tool has a very important influence on the quality of the workpiece. In particular, the high speed micro milling process puts forward higher requirements for dynamic characteristics. We take the micro-milling system as the research object and use ANSYS Workbench to establish the 3D solid model of the micro-cutting system, then simplify it. Using workbench ANSYS to carry on the static analysis, the modal analysis and Harmonic response to the micro-milling system, the weak link of the micro-milling system is pointed out, which provides guidance for the further optimization.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)

自引率

0.00%

发文量