Influence of Injection Molding Parameters on the Mechanical Properties of Injected PC/ABS Parts

This study optimized the influence of process parameters on the mechanical properties during injection molding (IM) of PC/ABS blend. The Taguchi method of design of experiments (DOE) was employed to optimize the process parameters and to increase the tensile strength and the elasticity module. Taguchi’s L9 (34) orthogonal array design was employed for the experimental plan. Process parameters of the injection molding such as material temperature, injection pressure, holding time, and mold temperature were studied with three levels. The Signal to noise (S/N) ratio for mechanical properties of PC/ABS blend using the Taguchi method was calculated. Taguchi’s results proposed two sets of optimal injection parameters conditions to achieve the best mechanical characteristics (σ, E). The (S/N) ratio results proved that the injection pressure was the more prominent than the other IM process parameters for the tensile strength, and the material temperature was the more prominent for the elasticity module.