用MATLAB/Simulink对并联型有源电力滤波器进行仿真

2010 4th International Power Engineering and Optimization Conference (PEOCO) Pub Date : 2010-06-23 DOI:10.1109/PEOCO.2010.5559218

Musa Yusup Lada, Ismadi Bugis, Md. Hairul Nizam Talib

{"title":"用MATLAB/Simulink对并联型有源电力滤波器进行仿真","authors":"Musa Yusup Lada, Ismadi Bugis, Md. Hairul Nizam Talib","doi":"10.1109/PEOCO.2010.5559218","DOIUrl":null,"url":null,"abstract":"Along with increasing demand on improving power quality, the most popular technique that has been used is Active Power Filter (APF); this is because APF can easily eliminate unwanted harmonics, improve power factor and overcome voltage sags. This paper will discuss and analyze the simulation result for a three-phase shunt active power filter using MATLAB/Simulink program. This simulation will implement a non-linear load and compensate line current harmonics under balance and unbalance load. As a result of the simulation, it is found that an active power filter is the better way to reduce the total harmonic distortion (THD) which is required by quality standards IEEE-519.","PeriodicalId":379868,"journal":{"name":"2010 4th International Power Engineering and Optimization Conference (PEOCO)","volume":"10 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2010-06-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"35","resultStr":"{\"title\":\"Simulation a shunt active power filter using MATLAB/Simulink\",\"authors\":\"Musa Yusup Lada, Ismadi Bugis, Md. Hairul Nizam Talib\",\"doi\":\"10.1109/PEOCO.2010.5559218\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Along with increasing demand on improving power quality, the most popular technique that has been used is Active Power Filter (APF); this is because APF can easily eliminate unwanted harmonics, improve power factor and overcome voltage sags. This paper will discuss and analyze the simulation result for a three-phase shunt active power filter using MATLAB/Simulink program. This simulation will implement a non-linear load and compensate line current harmonics under balance and unbalance load. As a result of the simulation, it is found that an active power filter is the better way to reduce the total harmonic distortion (THD) which is required by quality standards IEEE-519.\",\"PeriodicalId\":379868,\"journal\":{\"name\":\"2010 4th International Power Engineering and Optimization Conference (PEOCO)\",\"volume\":\"10 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2010-06-23\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"35\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2010 4th International Power Engineering and Optimization Conference (PEOCO)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/PEOCO.2010.5559218\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2010 4th International Power Engineering and Optimization Conference (PEOCO)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/PEOCO.2010.5559218","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 35

摘要

随着人们对改善电能质量的要求越来越高，目前最常用的技术是有源电力滤波器(APF);这是因为APF可以很容易地消除不必要的谐波，提高功率因数和克服电压下降。本文将利用MATLAB/Simulink程序对三相并联有源电力滤波器的仿真结果进行讨论和分析。该仿真将实现一个非线性负载，并补偿平衡和不平衡负载下的线路电流谐波。仿真结果表明，有源电力滤波器是降低IEEE-519质量标准要求的总谐波失真(THD)的较好方法。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Simulation a shunt active power filter using MATLAB/Simulink

Along with increasing demand on improving power quality, the most popular technique that has been used is Active Power Filter (APF); this is because APF can easily eliminate unwanted harmonics, improve power factor and overcome voltage sags. This paper will discuss and analyze the simulation result for a three-phase shunt active power filter using MATLAB/Simulink program. This simulation will implement a non-linear load and compensate line current harmonics under balance and unbalance load. As a result of the simulation, it is found that an active power filter is the better way to reduce the total harmonic distortion (THD) which is required by quality standards IEEE-519.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2010 4th International Power Engineering and Optimization Conference (PEOCO)

自引率

0.00%

发文量