{"title":"根据Standara DNV和BS-EN案例研究的设计进行比较","authors":"Feri Noviantoro, Indraswari Kusumaningtyas","doi":"10.22146/jmdt.60379","DOIUrl":null,"url":null,"abstract":"Abaqus Manual Book Version 6.8 (2008) – Getting started with Abaqus (Interactive Edition)ASTM A36/A36M - 14 (2015) – Standard Specification for Carbon Structural SteelBS EN 12079-1:2006 – Offshore containers and associated lifting sets — Part 1: Offshore containers — Design, manufacture and marking.BS EN 12079-2:2006 – Offshore containers and associated lifting sets — Part 2: Lifting sets — Design, manufacture and marking.BY Y. HIGASHIDA, J. D. BURK, AND F. V. LAWRENCE, JR. (1978). StrainControlled Fatigue Behavior of ASTM A36 and A514 Grade F Steels and 5083-0 Aluminum Weld Materials.Bukaka. (2010). Provision of Cargo Carrying Unit Project.Chevron. (2009). MCA – Lifting and Rigging Standard. Houston: Chevron Corporation.Crosby Catalogue (2003) – Crosby Bolt-Type ShacklesDaniela Scorza, Andrea Carpinteri, Sabrina Vantadori (2018). Tension failure assessment at lug hole edges. Department of Engineering & Architecture, University of Parma.DNV No. 2.7-1 2013 – Standard for Certification of Offshore Containers.Gérald Portemont, Julien Berthe, Alain Deudon, François-Xavier Irisarri (2018). Static and dynamic bearing failure of carbon/epoxy composite joints. DMAS, ONERA, University Paris Saclay.Henny Gusti Pramita, Handayanu dan Yoyok Setyo H. (2013). Analisis Struktur Padeye pada Proses Lifting Jacket Empat Kaki dengan Pendekatan Dinamik. Jurusan Teknik Kelautan, Fakultas Teknologi Kelautan, Institut Teknologi Sepuluh Nopember (ITS).Hikmat Saaid Saleh (2016). Ultimate capacity of pad eyes in lifting operations. Faculty of Science and Technology, University of Stavanger.Hoover Ferguson Group, Inc (2018) – Definition of Cargo Carrying UnitsIqbal Gayuh R.M.S, Yeyes M, dan Yoyok S.M. (2016). Analisis Keandalan Struktur Padeye Berdasarkan Konfigurasi Rigging pada Lifting Upper Deck Modul MODEC dengan Pendekatan Dinamik. Jurusan Teknik Kelautan, Fakultas Teknologi Kelautan, Institut Teknologi Sepuluh Nopember (ITS).Roberto Leon. (2018). Journal of Visualized Experiments, Stress-Strain Characteristics of Steels. Department of Civil and Environmental Engineering, Virginia Tech, Blacksburg, VAT.W. Ling, X.L. Zhao, R. Al-Mahaidi, J.A. Packer (2006). Investigation of block shear tear-out failure in gusset-plate welded connections in structural steel hollow sections and very high strength tubes. Civil Engineerng, Faculty of Civil Engineering, Monash University.","PeriodicalId":201653,"journal":{"name":"Journal of Mechanical Design and Testing","volume":"29 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2021-12-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Analisa Perbandingan Kekuatan Profil Padeye Berdasarkan Desain Standara DNV dan BS-EN Studi Kasus: Cargo Carrying Unit\",\"authors\":\"Feri Noviantoro, Indraswari Kusumaningtyas\",\"doi\":\"10.22146/jmdt.60379\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abaqus Manual Book Version 6.8 (2008) – Getting started with Abaqus (Interactive Edition)ASTM A36/A36M - 14 (2015) – Standard Specification for Carbon Structural SteelBS EN 12079-1:2006 – Offshore containers and associated lifting sets — Part 1: Offshore containers — Design, manufacture and marking.BS EN 12079-2:2006 – Offshore containers and associated lifting sets — Part 2: Lifting sets — Design, manufacture and marking.BY Y. HIGASHIDA, J. D. BURK, AND F. V. LAWRENCE, JR. (1978). StrainControlled Fatigue Behavior of ASTM A36 and A514 Grade F Steels and 5083-0 Aluminum Weld Materials.Bukaka. (2010). Provision of Cargo Carrying Unit Project.Chevron. (2009). MCA – Lifting and Rigging Standard. Houston: Chevron Corporation.Crosby Catalogue (2003) – Crosby Bolt-Type ShacklesDaniela Scorza, Andrea Carpinteri, Sabrina Vantadori (2018). Tension failure assessment at lug hole edges. Department of Engineering & Architecture, University of Parma.DNV No. 2.7-1 2013 – Standard for Certification of Offshore Containers.Gérald Portemont, Julien Berthe, Alain Deudon, François-Xavier Irisarri (2018). Static and dynamic bearing failure of carbon/epoxy composite joints. DMAS, ONERA, University Paris Saclay.Henny Gusti Pramita, Handayanu dan Yoyok Setyo H. (2013). Analisis Struktur Padeye pada Proses Lifting Jacket Empat Kaki dengan Pendekatan Dinamik. Jurusan Teknik Kelautan, Fakultas Teknologi Kelautan, Institut Teknologi Sepuluh Nopember (ITS).Hikmat Saaid Saleh (2016). Ultimate capacity of pad eyes in lifting operations. Faculty of Science and Technology, University of Stavanger.Hoover Ferguson Group, Inc (2018) – Definition of Cargo Carrying UnitsIqbal Gayuh R.M.S, Yeyes M, dan Yoyok S.M. (2016). Analisis Keandalan Struktur Padeye Berdasarkan Konfigurasi Rigging pada Lifting Upper Deck Modul MODEC dengan Pendekatan Dinamik. Jurusan Teknik Kelautan, Fakultas Teknologi Kelautan, Institut Teknologi Sepuluh Nopember (ITS).Roberto Leon. (2018). Journal of Visualized Experiments, Stress-Strain Characteristics of Steels. Department of Civil and Environmental Engineering, Virginia Tech, Blacksburg, VAT.W. Ling, X.L. Zhao, R. Al-Mahaidi, J.A. Packer (2006). Investigation of block shear tear-out failure in gusset-plate welded connections in structural steel hollow sections and very high strength tubes. Civil Engineerng, Faculty of Civil Engineering, Monash University.\",\"PeriodicalId\":201653,\"journal\":{\"name\":\"Journal of Mechanical Design and Testing\",\"volume\":\"29 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-12-27\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Mechanical Design and Testing\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.22146/jmdt.60379\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Mechanical Design and Testing","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.22146/jmdt.60379","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
摘要
ASTM A36/A36M - 14(2015) -碳结构钢标准规范EN 12079-1:2006 -海上集装箱和相关起重装置-第1部分:海上集装箱-设计，制造和标记。BS EN 12079-2:2006 .海上集装箱和相关起重装置。第2部分:起重装置。设计、制造和标记。作者:东田、柏克、劳伦斯(1978)。ASTM A36和A514级F钢和5083-0铝焊接材料的应变控制疲劳行为。(2010)。提供货物运输单元项目。雪佛龙。(2009)。MCA -起重和索具标准。休斯敦:雪佛龙公司。克罗斯比目录(2003)-克罗斯比螺栓式镣铐daniela Scorza, Andrea Carpinteri, Sabrina Vantadori(2018)。凸孔边缘拉伸失效评估。帕尔马大学工程与建筑系。DNV No. 2.7-1 2013 -海上集装箱发证标准。格姆拉德·波特蒙特、朱利安·贝特、阿兰·迪东、弗朗索瓦-泽维尔·伊里萨里(2018)。碳/环氧复合材料接头静、动轴承失效研究。DMAS, ONERA，巴黎萨克雷大学。Henny Gusti Pramita, Handayanu和Yoyok Setyo H.(2013)。结构分析:升降夹套结构分析。Jurusan Teknik Kelautan, Fakultas Teknologi Kelautan, Institut Teknologi sepulu11 (ITS)。希克马特·萨伊德·萨利赫(2016)。升降作业中垫眼的极限容量。斯塔万格大学科学技术学院。Hoover Ferguson Group, Inc .(2018) -货物运输单元的定义。bal Gayuh R.M.S, Yeyes M, dan Yoyok S.M.(2016)。上甲板吊装模块(MODEC)Jurusan Teknik Kelautan, Fakultas Teknologi Kelautan, Institut Teknologi sepulu11 (ITS)。罗伯特·莱昂。(2018)。可视化实验学报，钢的应力-应变特性。维吉尼亚理工大学土木与环境工程系，维吉尼亚州布莱克斯堡凌晓亮，赵晓亮，r.a Al-Mahaidi, J.A. Packer(2006)。结构钢空心截面与高强度钢管扣板焊接连接块剪撕裂破坏研究。莫纳什大学土木工程学院土木工程专业。
Analisa Perbandingan Kekuatan Profil Padeye Berdasarkan Desain Standara DNV dan BS-EN Studi Kasus: Cargo Carrying Unit
Abaqus Manual Book Version 6.8 (2008) – Getting started with Abaqus (Interactive Edition)ASTM A36/A36M - 14 (2015) – Standard Specification for Carbon Structural SteelBS EN 12079-1:2006 – Offshore containers and associated lifting sets — Part 1: Offshore containers — Design, manufacture and marking.BS EN 12079-2:2006 – Offshore containers and associated lifting sets — Part 2: Lifting sets — Design, manufacture and marking.BY Y. HIGASHIDA, J. D. BURK, AND F. V. LAWRENCE, JR. (1978). StrainControlled Fatigue Behavior of ASTM A36 and A514 Grade F Steels and 5083-0 Aluminum Weld Materials.Bukaka. (2010). Provision of Cargo Carrying Unit Project.Chevron. (2009). MCA – Lifting and Rigging Standard. Houston: Chevron Corporation.Crosby Catalogue (2003) – Crosby Bolt-Type ShacklesDaniela Scorza, Andrea Carpinteri, Sabrina Vantadori (2018). Tension failure assessment at lug hole edges. Department of Engineering & Architecture, University of Parma.DNV No. 2.7-1 2013 – Standard for Certification of Offshore Containers.Gérald Portemont, Julien Berthe, Alain Deudon, François-Xavier Irisarri (2018). Static and dynamic bearing failure of carbon/epoxy composite joints. DMAS, ONERA, University Paris Saclay.Henny Gusti Pramita, Handayanu dan Yoyok Setyo H. (2013). Analisis Struktur Padeye pada Proses Lifting Jacket Empat Kaki dengan Pendekatan Dinamik. Jurusan Teknik Kelautan, Fakultas Teknologi Kelautan, Institut Teknologi Sepuluh Nopember (ITS).Hikmat Saaid Saleh (2016). Ultimate capacity of pad eyes in lifting operations. Faculty of Science and Technology, University of Stavanger.Hoover Ferguson Group, Inc (2018) – Definition of Cargo Carrying UnitsIqbal Gayuh R.M.S, Yeyes M, dan Yoyok S.M. (2016). Analisis Keandalan Struktur Padeye Berdasarkan Konfigurasi Rigging pada Lifting Upper Deck Modul MODEC dengan Pendekatan Dinamik. Jurusan Teknik Kelautan, Fakultas Teknologi Kelautan, Institut Teknologi Sepuluh Nopember (ITS).Roberto Leon. (2018). Journal of Visualized Experiments, Stress-Strain Characteristics of Steels. Department of Civil and Environmental Engineering, Virginia Tech, Blacksburg, VAT.W. Ling, X.L. Zhao, R. Al-Mahaidi, J.A. Packer (2006). Investigation of block shear tear-out failure in gusset-plate welded connections in structural steel hollow sections and very high strength tubes. Civil Engineerng, Faculty of Civil Engineering, Monash University.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
