2.35 GHz波束形成系统SP4T开关电路设计

2016 IEEE International Conference on Communication, Networks and Satellite (COMNETSAT) Pub Date : 1900-01-01 DOI:10.1109/COMNETSAT.2016.7907413

Angga Hilman Hizrian, F. Zulkifli

{"title":"2.35 GHz波束形成系统SP4T开关电路设计","authors":"Angga Hilman Hizrian, F. Zulkifli","doi":"10.1109/COMNETSAT.2016.7907413","DOIUrl":null,"url":null,"abstract":"Beamforming techniques are used to determine the location of an object through filtering the frequency of signal emitted by the object. A beamforming system can consist of microstrip antenna, butler matrix circuit, and switching circuit which is the focus of this paper with SP4T (Single Pole Four Throw) switching design. ADS (Advance Design System) software is used to design the circuit which has the frequency range of 2.3 – 2.4 GHz. The SP4T simulation result have the approximate return loss value of −20 dB and the approximate insertion loss value of −7 dB at frequency of 2.35 GHz. The measurement result shows the return loss value of −13,48 dB and the insertion loss values range of (−11,403 dB) - (−5,936 dB). The circuit is active when there is no DC voltage supplied. If the circuit is supplied by the DC voltage, therefore the output power level decreased which indicates the circuit is not active.","PeriodicalId":284494,"journal":{"name":"2016 IEEE International Conference on Communication, Networks and Satellite (COMNETSAT)","volume":"41 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Designing SP4T switching circuit for beamforming system application at 2.35 GHz frequency\",\"authors\":\"Angga Hilman Hizrian, F. Zulkifli\",\"doi\":\"10.1109/COMNETSAT.2016.7907413\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Beamforming techniques are used to determine the location of an object through filtering the frequency of signal emitted by the object. A beamforming system can consist of microstrip antenna, butler matrix circuit, and switching circuit which is the focus of this paper with SP4T (Single Pole Four Throw) switching design. ADS (Advance Design System) software is used to design the circuit which has the frequency range of 2.3 – 2.4 GHz. The SP4T simulation result have the approximate return loss value of −20 dB and the approximate insertion loss value of −7 dB at frequency of 2.35 GHz. The measurement result shows the return loss value of −13,48 dB and the insertion loss values range of (−11,403 dB) - (−5,936 dB). The circuit is active when there is no DC voltage supplied. If the circuit is supplied by the DC voltage, therefore the output power level decreased which indicates the circuit is not active.\",\"PeriodicalId\":284494,\"journal\":{\"name\":\"2016 IEEE International Conference on Communication, Networks and Satellite (COMNETSAT)\",\"volume\":\"41 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1900-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 IEEE International Conference on Communication, Networks and Satellite (COMNETSAT)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/COMNETSAT.2016.7907413\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 IEEE International Conference on Communication, Networks and Satellite (COMNETSAT)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/COMNETSAT.2016.7907413","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

波束形成技术用于通过过滤物体发出的信号频率来确定物体的位置。波束形成系统可以由微带天线、巴特勒矩阵电路和开关电路组成，本文以SP4T(单极四掷)开关设计为重点。采用ADS (Advance Design System)软件进行电路设计，电路的频率范围为2.3 ~ 2.4 GHz。SP4T仿真结果显示，在2.35 GHz频率下，回波损耗近似为−20 dB，插入损耗近似为−7 dB。测量结果显示，回波损耗值为- 13,48 dB，插入损耗值范围为(- 11,403 dB) ~ (- 5,936 dB)。当没有直流电压供应时，电路是有源的。如果电路由直流电压供电，则输出功率水平降低，这表明电路不活跃。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Designing SP4T switching circuit for beamforming system application at 2.35 GHz frequency

Beamforming techniques are used to determine the location of an object through filtering the frequency of signal emitted by the object. A beamforming system can consist of microstrip antenna, butler matrix circuit, and switching circuit which is the focus of this paper with SP4T (Single Pole Four Throw) switching design. ADS (Advance Design System) software is used to design the circuit which has the frequency range of 2.3 – 2.4 GHz. The SP4T simulation result have the approximate return loss value of −20 dB and the approximate insertion loss value of −7 dB at frequency of 2.35 GHz. The measurement result shows the return loss value of −13,48 dB and the insertion loss values range of (−11,403 dB) - (−5,936 dB). The circuit is active when there is no DC voltage supplied. If the circuit is supplied by the DC voltage, therefore the output power level decreased which indicates the circuit is not active.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2016 IEEE International Conference on Communication, Networks and Satellite (COMNETSAT)

自引率

0.00%

发文量