带脉冲负载的2.5 kw LLC变换器非线性最优控制

W. Liu, S. Duan, Senwen Luo, Te Peng, Yadong Wang
{"title":"带脉冲负载的2.5 kw LLC变换器非线性最优控制","authors":"W. Liu, S. Duan, Senwen Luo, Te Peng, Yadong Wang","doi":"10.1109/CIYCEE55749.2022.9959007","DOIUrl":null,"url":null,"abstract":"In the case of pulse load, the power supply is constantly switched from no-load to full-load, which would cause the output voltage to fluctuate. In order to reduce the voltage fluctuation and improve the dynamic performance, a nonlinear control method is proposed in this paper. When the voltage change is detected, the control strategy is changed to switch between burst control and PFM control. The proposed control strategy is verified on a 2.5kW LLC prototype. The experimental results demonstrated that the output voltage drops, overshoots and settling time are reduced over the SOTC control method. It shows that the control strategy has a good effect in the pulse load application.","PeriodicalId":143306,"journal":{"name":"2022 IEEE 3rd China International Youth Conference on Electrical Engineering (CIYCEE)","volume":"24 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2022-11-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Nonlinear Optimal Control for 2.5-kW LLC Converts With Pulse Loads\",\"authors\":\"W. Liu, S. Duan, Senwen Luo, Te Peng, Yadong Wang\",\"doi\":\"10.1109/CIYCEE55749.2022.9959007\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In the case of pulse load, the power supply is constantly switched from no-load to full-load, which would cause the output voltage to fluctuate. In order to reduce the voltage fluctuation and improve the dynamic performance, a nonlinear control method is proposed in this paper. When the voltage change is detected, the control strategy is changed to switch between burst control and PFM control. The proposed control strategy is verified on a 2.5kW LLC prototype. The experimental results demonstrated that the output voltage drops, overshoots and settling time are reduced over the SOTC control method. It shows that the control strategy has a good effect in the pulse load application.\",\"PeriodicalId\":143306,\"journal\":{\"name\":\"2022 IEEE 3rd China International Youth Conference on Electrical Engineering (CIYCEE)\",\"volume\":\"24 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-11-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2022 IEEE 3rd China International Youth Conference on Electrical Engineering (CIYCEE)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/CIYCEE55749.2022.9959007\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2022 IEEE 3rd China International Youth Conference on Electrical Engineering (CIYCEE)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/CIYCEE55749.2022.9959007","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

在脉冲负载的情况下,电源不断地从空载切换到满载,这会导致输出电压波动。为了减小电压波动,提高系统的动态性能,本文提出了一种非线性控制方法。当检测到电压变化时,控制策略在突发控制和PFM控制之间切换。在2.5kW LLC样机上验证了所提出的控制策略。实验结果表明,该方法降低了输出压降、超调量和稳定时间。结果表明,该控制策略在脉冲负载应用中具有良好的效果。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Nonlinear Optimal Control for 2.5-kW LLC Converts With Pulse Loads
In the case of pulse load, the power supply is constantly switched from no-load to full-load, which would cause the output voltage to fluctuate. In order to reduce the voltage fluctuation and improve the dynamic performance, a nonlinear control method is proposed in this paper. When the voltage change is detected, the control strategy is changed to switch between burst control and PFM control. The proposed control strategy is verified on a 2.5kW LLC prototype. The experimental results demonstrated that the output voltage drops, overshoots and settling time are reduced over the SOTC control method. It shows that the control strategy has a good effect in the pulse load application.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信