双领结阵列天线在5G应用中的意义

2016 International Conference on Micro-Electronics and Telecommunication Engineering (ICMETE) Pub Date : 2016-09-01 DOI:10.1109/ICMETE.2016.108

P. Geethu, Lucky Saurabh, M. Tripathy, Sunil Kumar, A. Singh

{"title":"双领结阵列天线在5G应用中的意义","authors":"P. Geethu, Lucky Saurabh, M. Tripathy, Sunil Kumar, A. Singh","doi":"10.1109/ICMETE.2016.108","DOIUrl":null,"url":null,"abstract":"This paper focused on high bandwidth dual bow tie array millimeter wave antenna that is used especially for 5G (Fifth generation) application. Bow-tie design is low cost antenna with wide bandwidth of dimension 70×60×1.8 mm3. The proposed design is analyzed in different frequencies for 5G application and emphasis on return loss, Gain, Frequency vs. Gain as well as radiation pattern. Roger RT/ duroid material is used for this proposed design. The maximum gain obtained 24.44 dB and return loss of -31.10 dB are achieved at 57.10GHz and 18.90GHz respectively. HFSS simulation software is used for design and simulation of the design.","PeriodicalId":167368,"journal":{"name":"2016 International Conference on Micro-Electronics and Telecommunication Engineering (ICMETE)","volume":"64 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2016-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"5","resultStr":"{\"title\":\"The Significance of Dual Bow Tie Array Antenna for 5G Application\",\"authors\":\"P. Geethu, Lucky Saurabh, M. Tripathy, Sunil Kumar, A. Singh\",\"doi\":\"10.1109/ICMETE.2016.108\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper focused on high bandwidth dual bow tie array millimeter wave antenna that is used especially for 5G (Fifth generation) application. Bow-tie design is low cost antenna with wide bandwidth of dimension 70×60×1.8 mm3. The proposed design is analyzed in different frequencies for 5G application and emphasis on return loss, Gain, Frequency vs. Gain as well as radiation pattern. Roger RT/ duroid material is used for this proposed design. The maximum gain obtained 24.44 dB and return loss of -31.10 dB are achieved at 57.10GHz and 18.90GHz respectively. HFSS simulation software is used for design and simulation of the design.\",\"PeriodicalId\":167368,\"journal\":{\"name\":\"2016 International Conference on Micro-Electronics and Telecommunication Engineering (ICMETE)\",\"volume\":\"64 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2016-09-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"5\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 International Conference on Micro-Electronics and Telecommunication Engineering (ICMETE)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICMETE.2016.108\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 International Conference on Micro-Electronics and Telecommunication Engineering (ICMETE)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICMETE.2016.108","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 5

摘要

本文重点研究了5G(第五代)应用的高带宽双领结阵列毫米波天线。领结设计是一种低成本的宽带天线，尺寸为70×60×1.8 mm3。提出的设计在5G应用的不同频率下进行了分析，并重点分析了回波损耗、增益、频率增益以及辐射方向图。罗杰RT/ duroid材料被用于这个提议的设计。在57.10GHz和18.90GHz时，增益和回波损耗分别为24.44 dB和-31.10 dB。采用HFSS仿真软件进行设计和仿真。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

The Significance of Dual Bow Tie Array Antenna for 5G Application

This paper focused on high bandwidth dual bow tie array millimeter wave antenna that is used especially for 5G (Fifth generation) application. Bow-tie design is low cost antenna with wide bandwidth of dimension 70×60×1.8 mm3. The proposed design is analyzed in different frequencies for 5G application and emphasis on return loss, Gain, Frequency vs. Gain as well as radiation pattern. Roger RT/ duroid material is used for this proposed design. The maximum gain obtained 24.44 dB and return loss of -31.10 dB are achieved at 57.10GHz and 18.90GHz respectively. HFSS simulation software is used for design and simulation of the design.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2016 International Conference on Micro-Electronics and Telecommunication Engineering (ICMETE)

自引率

0.00%

发文量