采用7nm FinFET技术设计的基于逻辑的行冗余技术

V. Nautiyal, N. Nukala, F. Bohra, S. Dwivedi, J. Dasani, Satinderjit Singh, G. Singla, M. Kinkade
{"title":"采用7nm FinFET技术设计的基于逻辑的行冗余技术","authors":"V. Nautiyal, N. Nukala, F. Bohra, S. Dwivedi, J. Dasani, Satinderjit Singh, G. Singla, M. Kinkade","doi":"10.1109/ISQED.2018.8357300","DOIUrl":null,"url":null,"abstract":"In this paper, a row-redundancy circuit using latches is designed for 7nm FinFET ultra high density SRAM operating at 1.75 GHz. Input and faulty addresses are compared in parallel to the memory read access operation thus avoiding a major impact on access or address setup time. Latch output data is multiplexed with memory data and the impact on access time is only 7ps at SS/0.675V/-40°C corner. Data is written to redundant latches only when address comparison matches. The proposed circuit is implemented with no setup time impact and an overall area overhead of the proposed row redundancy scheme is less by 82% as compared to the area overhead of the conventional redundancy scheme.","PeriodicalId":213351,"journal":{"name":"2018 19th International Symposium on Quality Electronic Design (ISQED)","volume":"11 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2018-03-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Logic-based row redundancy technique designed in 7nm FinFET technology for embedded SRAMs\",\"authors\":\"V. Nautiyal, N. Nukala, F. Bohra, S. Dwivedi, J. Dasani, Satinderjit Singh, G. Singla, M. Kinkade\",\"doi\":\"10.1109/ISQED.2018.8357300\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, a row-redundancy circuit using latches is designed for 7nm FinFET ultra high density SRAM operating at 1.75 GHz. Input and faulty addresses are compared in parallel to the memory read access operation thus avoiding a major impact on access or address setup time. Latch output data is multiplexed with memory data and the impact on access time is only 7ps at SS/0.675V/-40°C corner. Data is written to redundant latches only when address comparison matches. The proposed circuit is implemented with no setup time impact and an overall area overhead of the proposed row redundancy scheme is less by 82% as compared to the area overhead of the conventional redundancy scheme.\",\"PeriodicalId\":213351,\"journal\":{\"name\":\"2018 19th International Symposium on Quality Electronic Design (ISQED)\",\"volume\":\"11 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2018-03-13\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2018 19th International Symposium on Quality Electronic Design (ISQED)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ISQED.2018.8357300\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2018 19th International Symposium on Quality Electronic Design (ISQED)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ISQED.2018.8357300","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 2

摘要

本文设计了一种采用锁存器的7nm FinFET超高密度SRAM行冗余电路,工作频率为1.75 GHz。输入和故障地址与存储器读访问操作并行比较,从而避免对访问或地址设置时间产生重大影响。锁存输出数据与内存数据复用,在SS/0.675V/-40°C角对访问时间的影响仅为7ps。只有当地址比较匹配时,数据才被写入冗余锁存器。该电路的实现没有设置时间的影响,并且与传统冗余方案的面积开销相比,该方案的总体面积开销减少了82%。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Logic-based row redundancy technique designed in 7nm FinFET technology for embedded SRAMs
In this paper, a row-redundancy circuit using latches is designed for 7nm FinFET ultra high density SRAM operating at 1.75 GHz. Input and faulty addresses are compared in parallel to the memory read access operation thus avoiding a major impact on access or address setup time. Latch output data is multiplexed with memory data and the impact on access time is only 7ps at SS/0.675V/-40°C corner. Data is written to redundant latches only when address comparison matches. The proposed circuit is implemented with no setup time impact and an overall area overhead of the proposed row redundancy scheme is less by 82% as compared to the area overhead of the conventional redundancy scheme.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信