通过切削力测量优化车削工艺

JSME international journal. Series 3, Vibration, control engineering, engineering for industry Pub Date : 1991-12-15 DOI:10.1299/JSMEC1988.34.546

Sawai Sukvittayawong, I. Inasaki

{"title":"通过切削力测量优化车削工艺","authors":"Sawai Sukvittayawong, I. Inasaki","doi":"10.1299/JSMEC1988.34.546","DOIUrl":null,"url":null,"abstract":"The needs of today's complex manufacturing systems requires the use of machine tools operated by means of an adaptively controlled system. Adaptive control provides continuous monitoring of performance and adjusts the system variables in order to approach the conditions optimum for the chosen performance objectives. This investigation proposes the in-process parameter estimation method of tool life in turning, in which the force ratio of feed force to tangential force due to the tool wear is detected. The method involves the analysis of the optimum cutting conditions based on the machining cost per unit volume of metal removed under the considered cutting constraints.","PeriodicalId":356058,"journal":{"name":"JSME international journal. Series 3, Vibration, control engineering, engineering for industry","volume":"18 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1991-12-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"23","resultStr":"{\"title\":\"OPTIMIZATION OF TURNING PROCESS BY CUTTING FORCE MEASUREMENT\",\"authors\":\"Sawai Sukvittayawong, I. Inasaki\",\"doi\":\"10.1299/JSMEC1988.34.546\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The needs of today's complex manufacturing systems requires the use of machine tools operated by means of an adaptively controlled system. Adaptive control provides continuous monitoring of performance and adjusts the system variables in order to approach the conditions optimum for the chosen performance objectives. This investigation proposes the in-process parameter estimation method of tool life in turning, in which the force ratio of feed force to tangential force due to the tool wear is detected. The method involves the analysis of the optimum cutting conditions based on the machining cost per unit volume of metal removed under the considered cutting constraints.\",\"PeriodicalId\":356058,\"journal\":{\"name\":\"JSME international journal. Series 3, Vibration, control engineering, engineering for industry\",\"volume\":\"18 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1991-12-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"23\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"JSME international journal. Series 3, Vibration, control engineering, engineering for industry\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1299/JSMEC1988.34.546\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"JSME international journal. Series 3, Vibration, control engineering, engineering for industry","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1299/JSMEC1988.34.546","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 23

摘要

当今复杂的制造系统需要使用由自适应控制系统操作的机床。自适应控制提供对性能的持续监控，并调整系统变量，以便接近所选性能目标的最佳条件。提出了车削过程中刀具寿命的过程参数估计方法，该方法检测了刀具磨损引起的进给力与切向力的比值。该方法根据所考虑的切削约束条件下单位体积金属的加工成本，分析最佳切削条件。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

OPTIMIZATION OF TURNING PROCESS BY CUTTING FORCE MEASUREMENT

The needs of today's complex manufacturing systems requires the use of machine tools operated by means of an adaptively controlled system. Adaptive control provides continuous monitoring of performance and adjusts the system variables in order to approach the conditions optimum for the chosen performance objectives. This investigation proposes the in-process parameter estimation method of tool life in turning, in which the force ratio of feed force to tangential force due to the tool wear is detected. The method involves the analysis of the optimum cutting conditions based on the machining cost per unit volume of metal removed under the considered cutting constraints.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

JSME international journal. Series 3, Vibration, control engineering, engineering for industry

自引率

0.00%

发文量