Control proposals for the operation of power converters in wind power systems

The wind turbines based on Doubly Fed Induction Generators (DFIG) represent almost the 60% of the installed windpower worldwide. Nowadays most of the existing algorithms, used for regulating the production of active and reactive power in such systems, are based on control techniques that use rotational reference frames theories, where the dqO is maybe the most popular. Despite of its good operation under balanced conditions its behaviour depends on a good phase synchronization, otherwise the different transformations cannot be performed with enough guarantees. Of course this kind of response is becomming insuficient, as far as the windpower penetration is increasing. This paper will present a new control topology for DFIG, that are connected using back to back inverters, that is able to behave better in case of faulty grids. Besides some proposals for improving the operation of the DFIG will be presented as well. The aim of that part is to extend the possibilities that the back to back inverters are able to offer to the generator system by means of including new functionalities, as the active filtering capability or the reduction of the flicker emission that will be later discussed.