双通道声呐扩频传输系统用于音频信号

J. Enderlein, S. Bechstein, E. Chilla, H.-J. Frohlich
{"title":"双通道声呐扩频传输系统用于音频信号","authors":"J. Enderlein, S. Bechstein, E. Chilla, H.-J. Frohlich","doi":"10.1109/ULTSYM.1996.583783","DOIUrl":null,"url":null,"abstract":"We have developed a two channel wireless audio transmission system applying a combination of frequency multiplex, frequency modulation, and SAW based spread spectrum technique. The coding/decoding is carried out asynchronously by a SAW phase shift keying filter. The acoustic devices have been fabricated on GaAs and LiTaO/sub 3/. The center frequency, bandwidth, code length, and code duration of the GaAs coder are 276 MHz, 48 MHz, 40 chip, and 1.4 /spl mu/s, respectively. The transmission was performed at the 2.4 GHz ISM band over a distance of 10 m with a transmission power less than 100 nW. A signal bandwidth of about 10 kHz per channel was achieved. The bit error rate of the transmission was 3/spl times/10/sup -8/. The rejection against jamming has been investigated.","PeriodicalId":278111,"journal":{"name":"1996 IEEE Ultrasonics Symposium. Proceedings","volume":"31 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1996-11-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Two channel SAW spread spectrum transmission system for audio signals\",\"authors\":\"J. Enderlein, S. Bechstein, E. Chilla, H.-J. Frohlich\",\"doi\":\"10.1109/ULTSYM.1996.583783\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"We have developed a two channel wireless audio transmission system applying a combination of frequency multiplex, frequency modulation, and SAW based spread spectrum technique. The coding/decoding is carried out asynchronously by a SAW phase shift keying filter. The acoustic devices have been fabricated on GaAs and LiTaO/sub 3/. The center frequency, bandwidth, code length, and code duration of the GaAs coder are 276 MHz, 48 MHz, 40 chip, and 1.4 /spl mu/s, respectively. The transmission was performed at the 2.4 GHz ISM band over a distance of 10 m with a transmission power less than 100 nW. A signal bandwidth of about 10 kHz per channel was achieved. The bit error rate of the transmission was 3/spl times/10/sup -8/. The rejection against jamming has been investigated.\",\"PeriodicalId\":278111,\"journal\":{\"name\":\"1996 IEEE Ultrasonics Symposium. Proceedings\",\"volume\":\"31 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1996-11-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"1996 IEEE Ultrasonics Symposium. Proceedings\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ULTSYM.1996.583783\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"1996 IEEE Ultrasonics Symposium. Proceedings","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ULTSYM.1996.583783","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

我们开发了一种双通道无线音频传输系统,该系统结合了频率复用、频率调制和基于声波的扩频技术。编码/解码由SAW相移键控滤波器异步执行。在GaAs和LiTaO/ sub3 /上制备了声器件。GaAs编码器的中心频率为276 MHz,带宽为48 MHz,码长为40片,码长为1.4 /spl mu/s。传输在2.4 GHz ISM频段进行,传输距离为10米,传输功率小于100 nW。每个信道的信号带宽约为10khz。传输误码率为3/spl倍/10/sup -8/。对抗干扰性能进行了研究。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Two channel SAW spread spectrum transmission system for audio signals
We have developed a two channel wireless audio transmission system applying a combination of frequency multiplex, frequency modulation, and SAW based spread spectrum technique. The coding/decoding is carried out asynchronously by a SAW phase shift keying filter. The acoustic devices have been fabricated on GaAs and LiTaO/sub 3/. The center frequency, bandwidth, code length, and code duration of the GaAs coder are 276 MHz, 48 MHz, 40 chip, and 1.4 /spl mu/s, respectively. The transmission was performed at the 2.4 GHz ISM band over a distance of 10 m with a transmission power less than 100 nW. A signal bandwidth of about 10 kHz per channel was achieved. The bit error rate of the transmission was 3/spl times/10/sup -8/. The rejection against jamming has been investigated.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信