用PLC作为分布式参数系统控制铸模预热

2015 20th International Conference on Process Control (PC) Pub Date : 2015-06-09 DOI:10.1109/PC.2015.7169987

G. Hulkó, C. Belavý, L. Bartalský, K. Ondrejkovic, M. Bartko

{"title":"用PLC作为分布式参数系统控制铸模预热","authors":"G. Hulkó, C. Belavý, L. Bartalský, K. Ondrejkovic, M. Bartko","doi":"10.1109/PC.2015.7169987","DOIUrl":null,"url":null,"abstract":"This paper deals with the control of the preheating process of a casting mould formulated as a distributed parameter system and using a programmable logic controller (PLC). The control process is first optimized by a simulation procedure using a distributed parameter control loop. The temporal part of the control synthesis is implemented on the PLC in order to control the preheating of the casting mould. A controlled preheating process is demonstrated on the experimental casting mould with embedded sensors and actuators.","PeriodicalId":173529,"journal":{"name":"2015 20th International Conference on Process Control (PC)","volume":"65 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2015-06-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Control of the preheating of a casting mould as a distributed parameter system by PLC\",\"authors\":\"G. Hulkó, C. Belavý, L. Bartalský, K. Ondrejkovic, M. Bartko\",\"doi\":\"10.1109/PC.2015.7169987\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper deals with the control of the preheating process of a casting mould formulated as a distributed parameter system and using a programmable logic controller (PLC). The control process is first optimized by a simulation procedure using a distributed parameter control loop. The temporal part of the control synthesis is implemented on the PLC in order to control the preheating of the casting mould. A controlled preheating process is demonstrated on the experimental casting mould with embedded sensors and actuators.\",\"PeriodicalId\":173529,\"journal\":{\"name\":\"2015 20th International Conference on Process Control (PC)\",\"volume\":\"65 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2015-06-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2015 20th International Conference on Process Control (PC)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/PC.2015.7169987\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2015 20th International Conference on Process Control (PC)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/PC.2015.7169987","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

本文研究了用可编程控制器(PLC)控制铸模预热过程的分布式参数系统。首先利用分布式参数控制回路对控制过程进行仿真优化。控制综合的时序部分在PLC上实现，以实现对铸型预热的控制。在嵌入式传感器和执行器的实验铸模上演示了一种控制预热过程。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Control of the preheating of a casting mould as a distributed parameter system by PLC

This paper deals with the control of the preheating process of a casting mould formulated as a distributed parameter system and using a programmable logic controller (PLC). The control process is first optimized by a simulation procedure using a distributed parameter control loop. The temporal part of the control synthesis is implemented on the PLC in order to control the preheating of the casting mould. A controlled preheating process is demonstrated on the experimental casting mould with embedded sensors and actuators.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2015 20th International Conference on Process Control (PC)

自引率

0.00%

发文量