Real-Time Waveform Matching with a Digitizer at 10 GS/s

Side-Channel Analysis (SCA) requires the detection of the specific time frame within which Cryptographic Operations (COs) take place in the side-channel signal. In laboratory conditions with full control over the Device under Test (DuT), dedicated trigger signals can be implemented to indicate the start and end of COs. For real-world scenarios, waveform-matching techniques have been established which compare the side-channel signal with a template of the CO's pattern in real time to detect the CO in the side channel. State-of-the-art approaches are implemented on Field-Programmable Gate Arrays (FPGAs). However, current waveform-matching designs process the samples from Analog-to-Digital Converters (ADCs) sequentially and can only work with low sampling rates due to the limited clock speed of FPGAs. This makes it increasingly difficult to apply existing techniques on modern DuTs that operate with clock speeds in the GHz range. In this paper, we present a parallel waveform-matching architecture that is capable of performing waveform matching at the speed of fast ADCs. We implement the proposed architecture in a high-end FPGA-based digitizer and deploy it to detect AES COs from the side channel of a single-board computer operating at 1 GHz. Our implementation allows for waveform matching at 10 GS/s with high accuracy, thus offering a speedup of 50× compared to the fastest state-of-the-art implementation known to us.