CMOS正交压控振荡器优化的图形化方法

Mellouli Dorra, M. Hassene, M. Loulou
{"title":"CMOS正交压控振荡器优化的图形化方法","authors":"Mellouli Dorra, M. Hassene, M. Loulou","doi":"10.1109/SM2ACD.2010.5672355","DOIUrl":null,"url":null,"abstract":"This paper describes a graphical method for the optimization of Quadrature Voltage Controlled Oscillators (QVCOs) based on the coupling of two LC-tank VCO. A three-dimensional phase noise analysis diagram and graphical optimization approach is presented, to optimize QVCO phase noise while satisfying design constraints such as power dissipation, tank amplitude, tuning range and start up condition. The obtained QVCO can be tuned between 2.2GHz and 2.58GHz, and shows a phase noise of −129 dBc/Hz at 1MHz offset from a 2.4 GHz carrier, for a current consumption of 9.25mW. The equivalent phase error and amplitude error between I and Q signals are respectively 0.65° and 1.87%.","PeriodicalId":442381,"journal":{"name":"2010 XIth International Workshop on Symbolic and Numerical Methods, Modeling and Applications to Circuit Design (SM2ACD)","volume":"18 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2010-12-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Graphical method for the optimization of CMOS quadrature VCO\",\"authors\":\"Mellouli Dorra, M. Hassene, M. Loulou\",\"doi\":\"10.1109/SM2ACD.2010.5672355\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper describes a graphical method for the optimization of Quadrature Voltage Controlled Oscillators (QVCOs) based on the coupling of two LC-tank VCO. A three-dimensional phase noise analysis diagram and graphical optimization approach is presented, to optimize QVCO phase noise while satisfying design constraints such as power dissipation, tank amplitude, tuning range and start up condition. The obtained QVCO can be tuned between 2.2GHz and 2.58GHz, and shows a phase noise of −129 dBc/Hz at 1MHz offset from a 2.4 GHz carrier, for a current consumption of 9.25mW. The equivalent phase error and amplitude error between I and Q signals are respectively 0.65° and 1.87%.\",\"PeriodicalId\":442381,\"journal\":{\"name\":\"2010 XIth International Workshop on Symbolic and Numerical Methods, Modeling and Applications to Circuit Design (SM2ACD)\",\"volume\":\"18 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2010-12-17\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2010 XIth International Workshop on Symbolic and Numerical Methods, Modeling and Applications to Circuit Design (SM2ACD)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/SM2ACD.2010.5672355\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2010 XIth International Workshop on Symbolic and Numerical Methods, Modeling and Applications to Circuit Design (SM2ACD)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/SM2ACD.2010.5672355","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

本文介绍了一种基于两个LC-tank电压控制振荡器耦合的正交电压控制振荡器(qvco)的图形化优化方法。为了在满足功耗、油箱幅值、调谐范围和启动条件等设计约束的情况下,优化QVCO的相位噪声,提出了三维相位噪声分析图和图形化优化方法。所获得的QVCO可以在2.2GHz和2.58GHz之间调谐,并且在与2.4 GHz载波的1MHz偏移时显示出−129 dBc/Hz的相位噪声,电流消耗为9.25mW。I和Q信号的等效相位误差和幅度误差分别为0.65°和1.87%。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Graphical method for the optimization of CMOS quadrature VCO
This paper describes a graphical method for the optimization of Quadrature Voltage Controlled Oscillators (QVCOs) based on the coupling of two LC-tank VCO. A three-dimensional phase noise analysis diagram and graphical optimization approach is presented, to optimize QVCO phase noise while satisfying design constraints such as power dissipation, tank amplitude, tuning range and start up condition. The obtained QVCO can be tuned between 2.2GHz and 2.58GHz, and shows a phase noise of −129 dBc/Hz at 1MHz offset from a 2.4 GHz carrier, for a current consumption of 9.25mW. The equivalent phase error and amplitude error between I and Q signals are respectively 0.65° and 1.87%.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信