基于pla的CP-SAR传感器3D打印圆极化x波段喇叭阵列天线

Agus Hendra Wahyudi, J. Sumantyo, S. Wijaya, A. Munir
{"title":"基于pla的CP-SAR传感器3D打印圆极化x波段喇叭阵列天线","authors":"Agus Hendra Wahyudi, J. Sumantyo, S. Wijaya, A. Munir","doi":"10.1109/IWAT.2018.8379219","DOIUrl":null,"url":null,"abstract":"This paper presents a polylactid-acid (PLA) based 3D printed circularly polarized 2 × 2 X-band horn array antenna for circularly polarized synthetic aperture radar (CP-SAR) sensor. The use of CP horn array antenna is to overcome some issues related with mismatch orientation and ionospheric effect of linear polarization sensor. The proposed array antenna which is intended to operate at X-band frequency is realized using PLA material through 3D printing technique and fed by series sequential feeding network implemented on a 1.6mm thick NPC-F220A dielectric substrate. From the result, it shows that the proposed CP horn array antenna has 3dB axial ratio bandwidth more than 400MHz in X-band frequency range.","PeriodicalId":212550,"journal":{"name":"2018 International Workshop on Antenna Technology (iWAT)","volume":"51 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2018-03-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"21","resultStr":"{\"title\":\"PLA-based 3D printed circularly polarized X-band horn array antenna for CP-SAR sensor\",\"authors\":\"Agus Hendra Wahyudi, J. Sumantyo, S. Wijaya, A. Munir\",\"doi\":\"10.1109/IWAT.2018.8379219\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents a polylactid-acid (PLA) based 3D printed circularly polarized 2 × 2 X-band horn array antenna for circularly polarized synthetic aperture radar (CP-SAR) sensor. The use of CP horn array antenna is to overcome some issues related with mismatch orientation and ionospheric effect of linear polarization sensor. The proposed array antenna which is intended to operate at X-band frequency is realized using PLA material through 3D printing technique and fed by series sequential feeding network implemented on a 1.6mm thick NPC-F220A dielectric substrate. From the result, it shows that the proposed CP horn array antenna has 3dB axial ratio bandwidth more than 400MHz in X-band frequency range.\",\"PeriodicalId\":212550,\"journal\":{\"name\":\"2018 International Workshop on Antenna Technology (iWAT)\",\"volume\":\"51 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2018-03-05\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"21\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2018 International Workshop on Antenna Technology (iWAT)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/IWAT.2018.8379219\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2018 International Workshop on Antenna Technology (iWAT)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/IWAT.2018.8379219","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 21

摘要

提出了一种基于聚乳酸(PLA)的3D打印圆极化2 × 2 x波段喇叭阵列天线,用于圆极化合成孔径雷达(CP-SAR)传感器。采用CP喇叭阵列天线是为了克服线极化传感器的定向失配和电离层效应等问题。该阵列天线的工作频率为x波段,采用3D打印技术,以PLA材料为材料,在1.6mm厚的NPC-F220A介质基板上采用串联顺序馈电网络馈电。结果表明,所设计的CP喇叭阵列天线在x波段具有大于400MHz的3dB轴比带宽。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
PLA-based 3D printed circularly polarized X-band horn array antenna for CP-SAR sensor
This paper presents a polylactid-acid (PLA) based 3D printed circularly polarized 2 × 2 X-band horn array antenna for circularly polarized synthetic aperture radar (CP-SAR) sensor. The use of CP horn array antenna is to overcome some issues related with mismatch orientation and ionospheric effect of linear polarization sensor. The proposed array antenna which is intended to operate at X-band frequency is realized using PLA material through 3D printing technique and fed by series sequential feeding network implemented on a 1.6mm thick NPC-F220A dielectric substrate. From the result, it shows that the proposed CP horn array antenna has 3dB axial ratio bandwidth more than 400MHz in X-band frequency range.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信