用于表面声源分离的扫描和波束形成器的设计与评估

Z. Zhong, Katsutoshi Itoyama, Kenji Nishida, K. Nakadai
{"title":"用于表面声源分离的扫描和波束形成器的设计与评估","authors":"Z. Zhong, Katsutoshi Itoyama, Kenji Nishida, K. Nakadai","doi":"10.1109/SII46433.2020.9025981","DOIUrl":null,"url":null,"abstract":"This paper proposes a novel robot audition technique for listening to a surface sound source. A beamforming technique called scan-and-sum beamformer is proposed. It performs sound source separation of general wide band surface sources distributed in the azimuth angle dimension. Because a sound source is mainly modeled as a point source in current signal processing technology, it is difficult for a robot or system with a conventional beamformer to address a surface source, though most sound sources in the real world are surface sources with a certain shape and size. The basic idea of scan-and-sum beamforming is to decompose a surface source into numerous point sources intensively distributed within a region, and then integrate results from point source sub-beamformers. In the scan-and-sum approach, a point source sub-beamformer scans with appropriate scanning density a region where target surface sources exist, and sub-beamformers are summed to separate the surface sound sources. Due to the high flexibility of the proposed beamformer, a mean square error (MSE) criterion for error analysis and cost function J to balance performance and cost are introduced, with guidelines on how to implement a scan-and-sum beamformer with tuned parameters and optimized pattern. Compared to conventional point source beamformers, beam patterns with a broader mainlobe and lower sidelobes can be achieved at acceptable cost. Numerical simulations show the proposed method improves signal-to-interference ratio (SIR) for a mixture of three surface sound sources.","PeriodicalId":253265,"journal":{"name":"2020 IEEE/SICE International Symposium on System Integration (SII)","volume":"45 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Design and Assessment of a Scan-and-sum Beamformer for Surface Sound Source Separation\",\"authors\":\"Z. Zhong, Katsutoshi Itoyama, Kenji Nishida, K. Nakadai\",\"doi\":\"10.1109/SII46433.2020.9025981\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper proposes a novel robot audition technique for listening to a surface sound source. A beamforming technique called scan-and-sum beamformer is proposed. It performs sound source separation of general wide band surface sources distributed in the azimuth angle dimension. Because a sound source is mainly modeled as a point source in current signal processing technology, it is difficult for a robot or system with a conventional beamformer to address a surface source, though most sound sources in the real world are surface sources with a certain shape and size. The basic idea of scan-and-sum beamforming is to decompose a surface source into numerous point sources intensively distributed within a region, and then integrate results from point source sub-beamformers. In the scan-and-sum approach, a point source sub-beamformer scans with appropriate scanning density a region where target surface sources exist, and sub-beamformers are summed to separate the surface sound sources. Due to the high flexibility of the proposed beamformer, a mean square error (MSE) criterion for error analysis and cost function J to balance performance and cost are introduced, with guidelines on how to implement a scan-and-sum beamformer with tuned parameters and optimized pattern. Compared to conventional point source beamformers, beam patterns with a broader mainlobe and lower sidelobes can be achieved at acceptable cost. Numerical simulations show the proposed method improves signal-to-interference ratio (SIR) for a mixture of three surface sound sources.\",\"PeriodicalId\":253265,\"journal\":{\"name\":\"2020 IEEE/SICE International Symposium on System Integration (SII)\",\"volume\":\"45 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2020 IEEE/SICE International Symposium on System Integration (SII)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/SII46433.2020.9025981\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2020 IEEE/SICE International Symposium on System Integration (SII)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/SII46433.2020.9025981","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 2

摘要

本文提出了一种新的机器人听音技术,用于听表面声源。提出了一种波束形成技术——扫描和波束形成技术。它对分布在方位角维度上的一般宽带面声源进行声源分离。由于目前的信号处理技术主要将声源建模为点源,因此使用传统波束形成器的机器人或系统很难处理表面声源,尽管现实世界中大多数声源都是具有一定形状和尺寸的表面声源。扫描和波束形成的基本思想是将一个面源分解成密集分布在一个区域内的多个点源,然后对点源子波束形成的结果进行综合。在扫描求和方法中,点源子波束形成器以适当的扫描密度对目标表面声源存在的区域进行扫描,并对子波束形成器进行求和以分离表面声源。由于所提出的波束形成器具有很高的灵活性,引入了误差分析的均方误差(MSE)准则和平衡性能和成本的成本函数J,并给出了如何实现具有调谐参数和优化方向图的扫描和波束形成器的指南。与传统的点源波束形成器相比,可以在可接受的成本下实现具有更宽主瓣和更低副瓣的波束模式。数值模拟结果表明,该方法提高了三个表面声源混合信号的信干扰比。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Design and Assessment of a Scan-and-sum Beamformer for Surface Sound Source Separation
This paper proposes a novel robot audition technique for listening to a surface sound source. A beamforming technique called scan-and-sum beamformer is proposed. It performs sound source separation of general wide band surface sources distributed in the azimuth angle dimension. Because a sound source is mainly modeled as a point source in current signal processing technology, it is difficult for a robot or system with a conventional beamformer to address a surface source, though most sound sources in the real world are surface sources with a certain shape and size. The basic idea of scan-and-sum beamforming is to decompose a surface source into numerous point sources intensively distributed within a region, and then integrate results from point source sub-beamformers. In the scan-and-sum approach, a point source sub-beamformer scans with appropriate scanning density a region where target surface sources exist, and sub-beamformers are summed to separate the surface sound sources. Due to the high flexibility of the proposed beamformer, a mean square error (MSE) criterion for error analysis and cost function J to balance performance and cost are introduced, with guidelines on how to implement a scan-and-sum beamformer with tuned parameters and optimized pattern. Compared to conventional point source beamformers, beam patterns with a broader mainlobe and lower sidelobes can be achieved at acceptable cost. Numerical simulations show the proposed method improves signal-to-interference ratio (SIR) for a mixture of three surface sound sources.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书