利用OpenFlow管理二层关键网络中的路径多样性

Elias Molina, J. Matías, A. Astarloa, E. Jacob
{"title":"利用OpenFlow管理二层关键网络中的路径多样性","authors":"Elias Molina, J. Matías, A. Astarloa, E. Jacob","doi":"10.1109/CNSM.2015.7367389","DOIUrl":null,"url":null,"abstract":"Critical environments demand redundant networks to achieve high availability. Also, many industrial applications have stringent latency requirements that must be met by the Ethernet mesh networks in which they are supported. However, redundant resources are usually used as backup solutions, being underutilized most of the time. This paper analyzes the relation between the network meshing and load balancing with the latency. As a representative example, it is shown that network management in modern substation automation systems can be improved through the Software-Defined Networking (SDN) paradigm. In contrast to spanning tree-based networks, this paper describes how the OpenFlow technology is used to control Local Area Networks (LANs) to make the most of redundant topologies. Thus, an external controller provides flow-aware load balancing that impacts directly latency reduction, meeting the IEC 61850 requirements. Through emulation it is studied how data flows in IEC 61850-based substation communication systems are balanced as required.","PeriodicalId":207635,"journal":{"name":"2015 11th International Conference on Network and Service Management (CNSM)","volume":"6 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2015-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"6","resultStr":"{\"title\":\"Managing path diversity in layer 2 critical networks by using OpenFlow\",\"authors\":\"Elias Molina, J. Matías, A. Astarloa, E. Jacob\",\"doi\":\"10.1109/CNSM.2015.7367389\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Critical environments demand redundant networks to achieve high availability. Also, many industrial applications have stringent latency requirements that must be met by the Ethernet mesh networks in which they are supported. However, redundant resources are usually used as backup solutions, being underutilized most of the time. This paper analyzes the relation between the network meshing and load balancing with the latency. As a representative example, it is shown that network management in modern substation automation systems can be improved through the Software-Defined Networking (SDN) paradigm. In contrast to spanning tree-based networks, this paper describes how the OpenFlow technology is used to control Local Area Networks (LANs) to make the most of redundant topologies. Thus, an external controller provides flow-aware load balancing that impacts directly latency reduction, meeting the IEC 61850 requirements. Through emulation it is studied how data flows in IEC 61850-based substation communication systems are balanced as required.\",\"PeriodicalId\":207635,\"journal\":{\"name\":\"2015 11th International Conference on Network and Service Management (CNSM)\",\"volume\":\"6 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2015-11-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"6\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2015 11th International Conference on Network and Service Management (CNSM)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/CNSM.2015.7367389\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2015 11th International Conference on Network and Service Management (CNSM)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/CNSM.2015.7367389","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 6

摘要

关键环境需要冗余网络来实现高可用性。此外,许多工业应用程序具有严格的延迟要求,必须由支持它们的以太网网状网络来满足。但是,冗余资源通常被用作备份解决方案,很多时候没有得到充分利用。本文分析了网络划分和负载均衡与时延之间的关系。作为一个典型的例子,表明通过软件定义网络(SDN)范式可以改善现代变电站自动化系统的网络管理。与基于生成树的网络相比,本文描述了如何使用OpenFlow技术来控制局域网(lan)以充分利用冗余拓扑。因此,外部控制器提供流感知负载平衡,直接影响延迟降低,满足IEC 61850要求。通过仿真研究了基于IEC 61850标准的变电站通信系统中数据流是如何按需平衡的。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Managing path diversity in layer 2 critical networks by using OpenFlow
Critical environments demand redundant networks to achieve high availability. Also, many industrial applications have stringent latency requirements that must be met by the Ethernet mesh networks in which they are supported. However, redundant resources are usually used as backup solutions, being underutilized most of the time. This paper analyzes the relation between the network meshing and load balancing with the latency. As a representative example, it is shown that network management in modern substation automation systems can be improved through the Software-Defined Networking (SDN) paradigm. In contrast to spanning tree-based networks, this paper describes how the OpenFlow technology is used to control Local Area Networks (LANs) to make the most of redundant topologies. Thus, an external controller provides flow-aware load balancing that impacts directly latency reduction, meeting the IEC 61850 requirements. Through emulation it is studied how data flows in IEC 61850-based substation communication systems are balanced as required.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书