Design of a 90/spl deg/ overmoded waveguide bend

A design for a 90/spl deg/ bend for the TE/sub 01/ mode in over-moded circular waveguide is presented. A pair of septa, symmetrically placed perpendicular to the plane of the bend, are adiabatically introduced into the waveguide before the bend and removed after it. Introduction of the curvature excites five propagating modes in the curved section. The finite element field solver YAP is used to calculate the propagation constants of these modes in the bend, and the guide diameter, septum depth, septum thickness, and bend radius are set so that the phase advances of all five modes through the bend are equal module 2/spl pi/. To a good approximation these modes are expected to recombine to form a pure mode at the end of the bend.<>