新型多孔脊腔结构三维生物活性涂层的等离子喷涂增材制备技术

V. I. Kalita, D. A. Malanin, A. I. Mamaev, Vera Alexanderovna Mamaeva, V. Novochadov, D. I. Komlev, V. Komlev, A. Radyuk
{"title":"新型多孔脊腔结构三维生物活性涂层的等离子喷涂增材制备技术","authors":"V. I. Kalita, D. A. Malanin, A. I. Mamaev, Vera Alexanderovna Mamaeva, V. Novochadov, D. I. Komlev, V. Komlev, A. Radyuk","doi":"10.2139/ssrn.3702819","DOIUrl":null,"url":null,"abstract":"Plasma off-angle spraying was used to design an additive technology for the preparation of three-dimensional capillary porous titanium (3D CP Ti) coatings with a new type of porous structure consisting of ridges and cavities. The high shear strength of titanium coatings, equalling 68 MPa, is determined by the coating structure, which assures the use of three arc discharges between the anode and cathode, cathode and wire, and cathode and substrate. Additional HA and HA-CaP coatings provide bioactive properties to the 3D CP Ti coatings. The HA and HA-CaP coatings were prepared by micro plasma oxidation (MPO). The 3D CP Ti-HA coating assures a more active osseointegration compared to that with the 3D CP Ti coating and determines the high shear strength (9.8±1.54 MPa) at the initial stage of osseointegration. The 3D CP Ti-HA-CaP-coated titanium implants demonstrate the steady increase in the osseous tissue density and a shear strength of 6.2±0.60 MPa reached after 48 weeks of implantation.","PeriodicalId":427123,"journal":{"name":"IRPN: Innovation & Product Development (Topic)","volume":"46 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2020-10-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Plasma Spraying for Additive Preparation Technology of 3D Bioactive Coatings with a New Type of Porous Ridge/Cavity Structure\",\"authors\":\"V. I. Kalita, D. A. Malanin, A. I. Mamaev, Vera Alexanderovna Mamaeva, V. Novochadov, D. I. Komlev, V. Komlev, A. Radyuk\",\"doi\":\"10.2139/ssrn.3702819\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Plasma off-angle spraying was used to design an additive technology for the preparation of three-dimensional capillary porous titanium (3D CP Ti) coatings with a new type of porous structure consisting of ridges and cavities. The high shear strength of titanium coatings, equalling 68 MPa, is determined by the coating structure, which assures the use of three arc discharges between the anode and cathode, cathode and wire, and cathode and substrate. Additional HA and HA-CaP coatings provide bioactive properties to the 3D CP Ti coatings. The HA and HA-CaP coatings were prepared by micro plasma oxidation (MPO). The 3D CP Ti-HA coating assures a more active osseointegration compared to that with the 3D CP Ti coating and determines the high shear strength (9.8±1.54 MPa) at the initial stage of osseointegration. The 3D CP Ti-HA-CaP-coated titanium implants demonstrate the steady increase in the osseous tissue density and a shear strength of 6.2±0.60 MPa reached after 48 weeks of implantation.\",\"PeriodicalId\":427123,\"journal\":{\"name\":\"IRPN: Innovation & Product Development (Topic)\",\"volume\":\"46 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-10-06\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"IRPN: Innovation & Product Development (Topic)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2139/ssrn.3702819\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"IRPN: Innovation & Product Development (Topic)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2139/ssrn.3702819","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

采用等离子体离角喷涂技术,设计了一种由脊和空腔组成的新型多孔结构的三维毛细管多孔钛(3D CP Ti)涂层的增材工艺。钛涂层的高抗剪强度为68 MPa,这是由涂层结构决定的,它保证了阳极与阴极、阴极与导线、阴极与基体之间的三弧放电。额外的HA和HA- cap涂层为3D CP Ti涂层提供了生物活性特性。采用微等离子体氧化(MPO)法制备HA和HA- cap涂层。与3D CP Ti涂层相比,3D CP Ti- ha涂层具有更强的骨整合活性,并在骨整合初期具有较高的抗剪强度(9.8±1.54 MPa)。3D CP ti - ha - cap涂层钛种植体在种植48周后骨组织密度稳定增加,抗剪强度达到6.2±0.60 MPa。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Plasma Spraying for Additive Preparation Technology of 3D Bioactive Coatings with a New Type of Porous Ridge/Cavity Structure
Plasma off-angle spraying was used to design an additive technology for the preparation of three-dimensional capillary porous titanium (3D CP Ti) coatings with a new type of porous structure consisting of ridges and cavities. The high shear strength of titanium coatings, equalling 68 MPa, is determined by the coating structure, which assures the use of three arc discharges between the anode and cathode, cathode and wire, and cathode and substrate. Additional HA and HA-CaP coatings provide bioactive properties to the 3D CP Ti coatings. The HA and HA-CaP coatings were prepared by micro plasma oxidation (MPO). The 3D CP Ti-HA coating assures a more active osseointegration compared to that with the 3D CP Ti coating and determines the high shear strength (9.8±1.54 MPa) at the initial stage of osseointegration. The 3D CP Ti-HA-CaP-coated titanium implants demonstrate the steady increase in the osseous tissue density and a shear strength of 6.2±0.60 MPa reached after 48 weeks of implantation.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书