在预混燃烧模式下使用不同喷射策略的各种合成气减少排放

H. Kurji, Aniekan Okon, A. Valera-Medina, C. Cheng-Tung
{"title":"在预混燃烧模式下使用不同喷射策略的各种合成气减少排放","authors":"H. Kurji, Aniekan Okon, A. Valera-Medina, C. Cheng-Tung","doi":"10.1109/ICSAE.2016.7810226","DOIUrl":null,"url":null,"abstract":"Increasing interest in alternative fuels for gas turbines has motivated research in gaseous fuels other than natural gas. Methane enriched with hydrogen or diluted with carbon dioxide are of considerable interest. The latter seems quite relevant for development of technologies such as oxyfuel combustion for carbon capture and storage in order to control temperatures in the combustion chamber. Thus, this paper presents an experimental study on the combustion of methane-carbon dioxide mixtures at atmospheric conditions. Gas mixtures have been examined by using different levels of premixing with different injection strategies with and without swirl and with and without central injection. A 20 kW burner has been used to investigate the flame stability and emissions performance by using these blends to examine the effect of CO2 addition. The burner configuration consisted of a centre body with an annular, premixed gas/air jet introduced through five, 60° swirl vanes. A TESTO 350XL gas analyzer was used to obtain NOx and CO emission trends to characterize all the injection regimes whilst using different fuel blends. CH chemiluminescence diagnostics was also used and correlated to the levels of emissions produced during the trials. The resulting images were analysed using Photron FASTCAM PFV ver 2.4.1.1 software and MATLAB R2015a. CO2 dilution decreased flame stability and operability range. The introduction of CO2 reduces temperatures in the combustion zone thus causing a reduction in emissions of nitrous oxides across all equivalence ratios. CO emissions also decreased with a limited (15%) CO2 addition. In terms of injection regimes, the outer purely premixed injection regime has lower NOx and CO, as expected. CH chemiluminescence distribution indicated that pure methane with central injection produced high fluctuation in CH production. The use of central premixed injection produces the most chaotic CH production case, possibly as a consequence of production of radicals in the central recirculation zone.","PeriodicalId":214121,"journal":{"name":"2016 International Conference for Students on Applied Engineering (ICSAE)","volume":"140 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2016-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Reduction of emissions by using various syngases with different injection strategies under premixed combustion mode\",\"authors\":\"H. Kurji, Aniekan Okon, A. Valera-Medina, C. Cheng-Tung\",\"doi\":\"10.1109/ICSAE.2016.7810226\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Increasing interest in alternative fuels for gas turbines has motivated research in gaseous fuels other than natural gas. Methane enriched with hydrogen or diluted with carbon dioxide are of considerable interest. The latter seems quite relevant for development of technologies such as oxyfuel combustion for carbon capture and storage in order to control temperatures in the combustion chamber. Thus, this paper presents an experimental study on the combustion of methane-carbon dioxide mixtures at atmospheric conditions. Gas mixtures have been examined by using different levels of premixing with different injection strategies with and without swirl and with and without central injection. A 20 kW burner has been used to investigate the flame stability and emissions performance by using these blends to examine the effect of CO2 addition. The burner configuration consisted of a centre body with an annular, premixed gas/air jet introduced through five, 60° swirl vanes. A TESTO 350XL gas analyzer was used to obtain NOx and CO emission trends to characterize all the injection regimes whilst using different fuel blends. CH chemiluminescence diagnostics was also used and correlated to the levels of emissions produced during the trials. The resulting images were analysed using Photron FASTCAM PFV ver 2.4.1.1 software and MATLAB R2015a. CO2 dilution decreased flame stability and operability range. The introduction of CO2 reduces temperatures in the combustion zone thus causing a reduction in emissions of nitrous oxides across all equivalence ratios. CO emissions also decreased with a limited (15%) CO2 addition. In terms of injection regimes, the outer purely premixed injection regime has lower NOx and CO, as expected. CH chemiluminescence distribution indicated that pure methane with central injection produced high fluctuation in CH production. The use of central premixed injection produces the most chaotic CH production case, possibly as a consequence of production of radicals in the central recirculation zone.\",\"PeriodicalId\":214121,\"journal\":{\"name\":\"2016 International Conference for Students on Applied Engineering (ICSAE)\",\"volume\":\"140 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2016-06-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 International Conference for Students on Applied Engineering (ICSAE)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICSAE.2016.7810226\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 International Conference for Students on Applied Engineering (ICSAE)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICSAE.2016.7810226","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

摘要

人们对燃气轮机替代燃料的兴趣日益浓厚,这推动了对天然气以外的气体燃料的研究。用氢富集或用二氧化碳稀释的甲烷引起了相当大的兴趣。后者似乎与诸如用于碳捕获和储存的氧燃料燃烧等技术的发展非常相关,以控制燃烧室的温度。因此,本文对甲烷-二氧化碳混合物在大气条件下的燃烧进行了实验研究。通过使用不同的预混水平和不同的喷射策略(有和没有旋流以及有和没有中心喷射)对气体混合物进行了测试。使用20 kW燃烧器,通过使用这些混合物来检查CO2添加的影响,研究了火焰稳定性和排放性能。燃烧器的结构包括一个中心体,通过五个60°旋流叶片引入环形预混气体/空气射流。使用TESTO 350XL气体分析仪获得NOx和CO排放趋势,以表征使用不同燃料混合物时的所有喷射模式。还使用了CH化学发光诊断,并与试验期间产生的排放水平相关。使用Photron FASTCAM PFV ver 2.4.1.1软件和MATLAB R2015a对所得图像进行分析。二氧化碳稀释降低了火焰稳定性和可操作范围。二氧化碳的引入降低了燃烧区的温度,从而减少了所有等效比率的氧化亚氮排放。CO排放量也随着有限的(15%)CO2添加量的减少而减少。在喷射模式方面,正如预期的那样,外部纯预混喷射模式具有更低的NOx和CO。甲烷的化学发光分布表明,中心注气的纯甲烷产生的甲烷量波动较大。使用中心预混注射产生最混乱的CH生成情况,可能是由于在中心再循环区产生自由基的结果。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Reduction of emissions by using various syngases with different injection strategies under premixed combustion mode
Increasing interest in alternative fuels for gas turbines has motivated research in gaseous fuels other than natural gas. Methane enriched with hydrogen or diluted with carbon dioxide are of considerable interest. The latter seems quite relevant for development of technologies such as oxyfuel combustion for carbon capture and storage in order to control temperatures in the combustion chamber. Thus, this paper presents an experimental study on the combustion of methane-carbon dioxide mixtures at atmospheric conditions. Gas mixtures have been examined by using different levels of premixing with different injection strategies with and without swirl and with and without central injection. A 20 kW burner has been used to investigate the flame stability and emissions performance by using these blends to examine the effect of CO2 addition. The burner configuration consisted of a centre body with an annular, premixed gas/air jet introduced through five, 60° swirl vanes. A TESTO 350XL gas analyzer was used to obtain NOx and CO emission trends to characterize all the injection regimes whilst using different fuel blends. CH chemiluminescence diagnostics was also used and correlated to the levels of emissions produced during the trials. The resulting images were analysed using Photron FASTCAM PFV ver 2.4.1.1 software and MATLAB R2015a. CO2 dilution decreased flame stability and operability range. The introduction of CO2 reduces temperatures in the combustion zone thus causing a reduction in emissions of nitrous oxides across all equivalence ratios. CO emissions also decreased with a limited (15%) CO2 addition. In terms of injection regimes, the outer purely premixed injection regime has lower NOx and CO, as expected. CH chemiluminescence distribution indicated that pure methane with central injection produced high fluctuation in CH production. The use of central premixed injection produces the most chaotic CH production case, possibly as a consequence of production of radicals in the central recirculation zone.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信