通用软件-硬件测量综合体，用于测试各种同步电机

2016 IEEE International Conference on Electro Information Technology (EIT) Pub Date : 2016-08-08 DOI:10.1109/EIT.2016.7535249

E. Lyubimov, S. P. Gladyshev, D. Istselemov, N. Belyaev

{"title":"通用软件-硬件测量综合体，用于测试各种同步电机","authors":"E. Lyubimov, S. P. Gladyshev, D. Istselemov, N. Belyaev","doi":"10.1109/EIT.2016.7535249","DOIUrl":null,"url":null,"abstract":"Synchronous electrical machines need to be tested after fabrication and also during maintenance. For this purpose can be useful suggested new measurement complex. The software structure of the considered measurement complex was designed in compliance with: Russian, IEC, and IEEE standards for testing synchronous machines. The software of measurement complex was designed on base “LabVIEW®” development metods and is orientated to work with National Instruments hardware. The measurement system software was tested using a designed peculiar laboratory test stand, which is based on the 700W G273 alternator. It also was tested by using (HIL) model of the 800kW STD-800 synchronous motor. The testing results show operability and high accuracy of the measurement system.","PeriodicalId":333489,"journal":{"name":"2016 IEEE International Conference on Electro Information Technology (EIT)","volume":"86 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2016-08-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Universal software-hardware measurement complex for testing wide range of synchronous machines\",\"authors\":\"E. Lyubimov, S. P. Gladyshev, D. Istselemov, N. Belyaev\",\"doi\":\"10.1109/EIT.2016.7535249\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Synchronous electrical machines need to be tested after fabrication and also during maintenance. For this purpose can be useful suggested new measurement complex. The software structure of the considered measurement complex was designed in compliance with: Russian, IEC, and IEEE standards for testing synchronous machines. The software of measurement complex was designed on base “LabVIEW®” development metods and is orientated to work with National Instruments hardware. The measurement system software was tested using a designed peculiar laboratory test stand, which is based on the 700W G273 alternator. It also was tested by using (HIL) model of the 800kW STD-800 synchronous motor. The testing results show operability and high accuracy of the measurement system.\",\"PeriodicalId\":333489,\"journal\":{\"name\":\"2016 IEEE International Conference on Electro Information Technology (EIT)\",\"volume\":\"86 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2016-08-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 IEEE International Conference on Electro Information Technology (EIT)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/EIT.2016.7535249\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 IEEE International Conference on Electro Information Technology (EIT)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/EIT.2016.7535249","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

同步电机需要在制造后和维护期间进行测试。为此可提出有用的新测量复合体。所考虑的测量复合体的软件结构是按照俄罗斯、IEC和IEEE标准设计的，用于测试同步电机。测量综合体软件是基于“LabVIEW®”开发方法设计的，面向与美国国家仪器公司的硬件工作。测量系统软件在设计的专用实验室试验台上进行了测试，试验台以700W G273交流发电机为基础。并利用800kW STD-800同步电动机的(HIL)模型进行了试验。测试结果表明，该测量系统具有较高的可操作性和精度。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Universal software-hardware measurement complex for testing wide range of synchronous machines

Synchronous electrical machines need to be tested after fabrication and also during maintenance. For this purpose can be useful suggested new measurement complex. The software structure of the considered measurement complex was designed in compliance with: Russian, IEC, and IEEE standards for testing synchronous machines. The software of measurement complex was designed on base “LabVIEW®” development metods and is orientated to work with National Instruments hardware. The measurement system software was tested using a designed peculiar laboratory test stand, which is based on the 700W G273 alternator. It also was tested by using (HIL) model of the 800kW STD-800 synchronous motor. The testing results show operability and high accuracy of the measurement system.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2016 IEEE International Conference on Electro Information Technology (EIT)

自引率

0.00%

发文量