光放大器噪声约束下OTN网络的设计与优化

G. Maier, Roberto Gibellini, A. Pattavina, M. Martinelli
{"title":"光放大器噪声约束下OTN网络的设计与优化","authors":"G. Maier, Roberto Gibellini, A. Pattavina, M. Martinelli","doi":"10.1117/12.533812","DOIUrl":null,"url":null,"abstract":"A design method is proposed that minimizes the deployment cost of a network when only a limited number of OXCs is capable of 3-R regeneration. Optimization, based on a given static-traffic matrix, is carried out by routing lightpaths with constrained signal degradation. Constraint-based routing and wavelength assignment is performed considering accumulation of noise due to amplified spontaneous emission of optical amplifiers as the major cause of signal degradation. A general multilayer design and optimization procedure is developed and applied to some case-study networks. The effects of the variation of design parameters such as amplification-span length, wavelength conversion capability distribution and optical protection capability is investigated.","PeriodicalId":187370,"journal":{"name":"OptiComm: Optical Networking and Communications Conference","volume":"1 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2003-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"OTN network design and optimization under the optical amplifier noise constraint\",\"authors\":\"G. Maier, Roberto Gibellini, A. Pattavina, M. Martinelli\",\"doi\":\"10.1117/12.533812\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A design method is proposed that minimizes the deployment cost of a network when only a limited number of OXCs is capable of 3-R regeneration. Optimization, based on a given static-traffic matrix, is carried out by routing lightpaths with constrained signal degradation. Constraint-based routing and wavelength assignment is performed considering accumulation of noise due to amplified spontaneous emission of optical amplifiers as the major cause of signal degradation. A general multilayer design and optimization procedure is developed and applied to some case-study networks. The effects of the variation of design parameters such as amplification-span length, wavelength conversion capability distribution and optical protection capability is investigated.\",\"PeriodicalId\":187370,\"journal\":{\"name\":\"OptiComm: Optical Networking and Communications Conference\",\"volume\":\"1 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2003-10-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"OptiComm: Optical Networking and Communications Conference\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1117/12.533812\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"OptiComm: Optical Networking and Communications Conference","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1117/12.533812","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

摘要

提出了一种设计方法,当只有有限数量的oxc能够进行3-R再生时,使网络的部署成本最小化。优化,基于给定的静态流量矩阵,进行路由光路与约束信号退化。基于约束的路由和波长分配考虑到由于光放大器放大的自发发射引起的噪声积累是信号退化的主要原因。开发了一种通用的多层设计和优化程序,并将其应用于一些案例研究网络。研究了放大跨度长度、波长转换能力分布和光防护能力等设计参数的变化对放大器性能的影响。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
OTN network design and optimization under the optical amplifier noise constraint
A design method is proposed that minimizes the deployment cost of a network when only a limited number of OXCs is capable of 3-R regeneration. Optimization, based on a given static-traffic matrix, is carried out by routing lightpaths with constrained signal degradation. Constraint-based routing and wavelength assignment is performed considering accumulation of noise due to amplified spontaneous emission of optical amplifiers as the major cause of signal degradation. A general multilayer design and optimization procedure is developed and applied to some case-study networks. The effects of the variation of design parameters such as amplification-span length, wavelength conversion capability distribution and optical protection capability is investigated.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信