海上输电优化拓扑设计与比较

Sheng Wang, Jun Liang, J. Ekanayake
{"title":"海上输电优化拓扑设计与比较","authors":"Sheng Wang, Jun Liang, J. Ekanayake","doi":"10.1109/UPEC.2012.6398577","DOIUrl":null,"url":null,"abstract":"This paper presents an economical and technological comparison between a conventional point to point (PTP) VSC-HVDC system and a DC mesh grid. A case study based on Dogger Bank Creyke Beck is used for this investigation. In the economic comparison, three main components are considered- VSC converter, DC cable and DC circuit breaker. The cost of losses is analyzed and the investment cost is estimated. Simulation using PSCAD/EMTDC is undertaken to support the technology assessment. The system redundancy during normal conditions is presented while the performance of each topology during fault condition is also illustrated. It is concluded that a DC mesh grid is more flexible in technology aspect and saves the costs.","PeriodicalId":326950,"journal":{"name":"2012 47th International Universities Power Engineering Conference (UPEC)","volume":"54 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2012-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"Optimised topology design and comparison for offshore transmission\",\"authors\":\"Sheng Wang, Jun Liang, J. Ekanayake\",\"doi\":\"10.1109/UPEC.2012.6398577\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents an economical and technological comparison between a conventional point to point (PTP) VSC-HVDC system and a DC mesh grid. A case study based on Dogger Bank Creyke Beck is used for this investigation. In the economic comparison, three main components are considered- VSC converter, DC cable and DC circuit breaker. The cost of losses is analyzed and the investment cost is estimated. Simulation using PSCAD/EMTDC is undertaken to support the technology assessment. The system redundancy during normal conditions is presented while the performance of each topology during fault condition is also illustrated. It is concluded that a DC mesh grid is more flexible in technology aspect and saves the costs.\",\"PeriodicalId\":326950,\"journal\":{\"name\":\"2012 47th International Universities Power Engineering Conference (UPEC)\",\"volume\":\"54 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2012-12-31\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2012 47th International Universities Power Engineering Conference (UPEC)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/UPEC.2012.6398577\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2012 47th International Universities Power Engineering Conference (UPEC)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/UPEC.2012.6398577","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 3

摘要

本文对传统的点对点(PTP) VSC-HVDC系统与直流网状电网进行了经济和技术比较。本研究以多格尔银行的Creyke Beck为例。在经济比较中,考虑了三个主要部件——VSC变换器、直流电缆和直流断路器。分析了损失成本,估算了投资成本。利用PSCAD/EMTDC进行模拟,以支持技术评估。给出了系统在正常情况下的冗余性,并对各拓扑在故障情况下的性能进行了分析。结果表明,直流网格在技术上更加灵活,节约了成本。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Optimised topology design and comparison for offshore transmission
This paper presents an economical and technological comparison between a conventional point to point (PTP) VSC-HVDC system and a DC mesh grid. A case study based on Dogger Bank Creyke Beck is used for this investigation. In the economic comparison, three main components are considered- VSC converter, DC cable and DC circuit breaker. The cost of losses is analyzed and the investment cost is estimated. Simulation using PSCAD/EMTDC is undertaken to support the technology assessment. The system redundancy during normal conditions is presented while the performance of each topology during fault condition is also illustrated. It is concluded that a DC mesh grid is more flexible in technology aspect and saves the costs.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信