Simplified Control Structure of Fuzzy Logic and Kalman Filter for Induction Motor Drive

The paper deals with the utilization of Kalman filter and fuzzy logic control in induction motor drive with direct torque control (DTC). In order to lower ripple of stator current vector in DTC drive, pulse width modulation technique with high switching frequency is applied. However, the performance of the DTC also depends on the accuracy of both stator resistance and stator current vector. In the paper, the stator resistance and stator current components are assumed to be distorted by Gaussian noises. In order to reduce the effect of noises especially at low speed and very low speed regions, a simple Kalman filter is applied for filtering current components, and fuzzy logic theory is used to increase the flexibility of proportional-integral (PI) compensator in the speed controller of the drive structure. Simulations are implemented in conditions of high-level noises of stator current and stator resistance, and a wide range of load torque. An ITAE-based criterion is utilized to evaluate the performance of drive structures. Results confirmed the expected dynamic properties of the proposed drive structure. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium provided the original work is properly cited.