利用焚烧炉余热热发电机(TEG)纳米发电的实验建模

2018 International Seminar on Intelligent Technology and Its Applications (ISITIA) Pub Date : 2018-08-01 DOI:10.1109/ISITIA.2018.8710874

Miftah Y. Fauzan, Syed Islam, S. Muyeen, A. S. Wardhana, Soedibyo, M. Ashari

{"title":"利用焚烧炉余热热发电机(TEG)纳米发电的实验建模","authors":"Miftah Y. Fauzan, Syed Islam, S. Muyeen, A. S. Wardhana, Soedibyo, M. Ashari","doi":"10.1109/ISITIA.2018.8710874","DOIUrl":null,"url":null,"abstract":"This paper presents experimental investigation of nano power generation, less than 1 kW size, using Thermoelectric Generator (TEG). The heat source is expected from waste temperature of incinerator, but in the laboratory experimental it was from electric heat source controlled by electronics device. A prototype of 0.02 kW system, comprising 24 modules of TEG bismuth telluride type connected in series, was built. The system is attached with cooling and temperature control to investigate the characteristics. Preliminary experiments and analytical models of electric output power as function of specific temperature were presented. An optimum output power could be set at a certain condition.","PeriodicalId":388463,"journal":{"name":"2018 International Seminar on Intelligent Technology and Its Applications (ISITIA)","volume":"94 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2018-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Experimental Modeling of Nano Power Generation using Thermoelectric Generator (TEG) from Incinerator Waste Heat\",\"authors\":\"Miftah Y. Fauzan, Syed Islam, S. Muyeen, A. S. Wardhana, Soedibyo, M. Ashari\",\"doi\":\"10.1109/ISITIA.2018.8710874\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents experimental investigation of nano power generation, less than 1 kW size, using Thermoelectric Generator (TEG). The heat source is expected from waste temperature of incinerator, but in the laboratory experimental it was from electric heat source controlled by electronics device. A prototype of 0.02 kW system, comprising 24 modules of TEG bismuth telluride type connected in series, was built. The system is attached with cooling and temperature control to investigate the characteristics. Preliminary experiments and analytical models of electric output power as function of specific temperature were presented. An optimum output power could be set at a certain condition.\",\"PeriodicalId\":388463,\"journal\":{\"name\":\"2018 International Seminar on Intelligent Technology and Its Applications (ISITIA)\",\"volume\":\"94 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2018-08-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2018 International Seminar on Intelligent Technology and Its Applications (ISITIA)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ISITIA.2018.8710874\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2018 International Seminar on Intelligent Technology and Its Applications (ISITIA)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ISITIA.2018.8710874","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 2

摘要

本文介绍了利用热电发电机(TEG)进行小于1千瓦纳米级发电的实验研究。期望热源来自焚烧炉的废渣温度，但在实验室实验中，热源来自电子设备控制的电热源。建立了由24个TEG型碲化铋模块串联组成的0.02 kW系统样机。该系统附有冷却和温度控制，以研究其特性。给出了电输出功率随温度变化的初步实验和分析模型。在一定的条件下可以得到一个最佳输出功率。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Experimental Modeling of Nano Power Generation using Thermoelectric Generator (TEG) from Incinerator Waste Heat

This paper presents experimental investigation of nano power generation, less than 1 kW size, using Thermoelectric Generator (TEG). The heat source is expected from waste temperature of incinerator, but in the laboratory experimental it was from electric heat source controlled by electronics device. A prototype of 0.02 kW system, comprising 24 modules of TEG bismuth telluride type connected in series, was built. The system is attached with cooling and temperature control to investigate the characteristics. Preliminary experiments and analytical models of electric output power as function of specific temperature were presented. An optimum output power could be set at a certain condition.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2018 International Seminar on Intelligent Technology and Its Applications (ISITIA)

自引率

0.00%

发文量