ku波段压控振荡器的设计

2013 IEEE International Wireless Symposium (IWS) Pub Date : 2013-04-14 DOI:10.1109/IEEE-IWS.2013.6616795

Q. Guo

{"title":"ku波段压控振荡器的设计","authors":"Q. Guo","doi":"10.1109/IEEE-IWS.2013.6616795","DOIUrl":null,"url":null,"abstract":"In this paper, a Ku band voltage controlled oscillator with a frequency range of 220MHz is presented. By changing the traditional structure, combining the resonance with the active component through direct coupling, the oscillator becomes easier to oscillate; therefore the performance of the oscillator has been improved. The output power is 4.79dBm and 7.02dBm at 12.24GHz and 12.49GHz, respectively. The control voltage ranges from 1V to 12V. The phase noise is -66.73dBc/Hz@100KHz at 12.49GHz.","PeriodicalId":344851,"journal":{"name":"2013 IEEE International Wireless Symposium (IWS)","volume":"71 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2013-04-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Design of a Ku-band voltage controlled oscillator\",\"authors\":\"Q. Guo\",\"doi\":\"10.1109/IEEE-IWS.2013.6616795\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, a Ku band voltage controlled oscillator with a frequency range of 220MHz is presented. By changing the traditional structure, combining the resonance with the active component through direct coupling, the oscillator becomes easier to oscillate; therefore the performance of the oscillator has been improved. The output power is 4.79dBm and 7.02dBm at 12.24GHz and 12.49GHz, respectively. The control voltage ranges from 1V to 12V. The phase noise is -66.73dBc/Hz@100KHz at 12.49GHz.\",\"PeriodicalId\":344851,\"journal\":{\"name\":\"2013 IEEE International Wireless Symposium (IWS)\",\"volume\":\"71 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2013-04-14\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2013 IEEE International Wireless Symposium (IWS)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/IEEE-IWS.2013.6616795\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2013 IEEE International Wireless Symposium (IWS)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/IEEE-IWS.2013.6616795","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

本文设计了一种频率范围为220MHz的Ku波段压控振荡器。通过改变传统结构，通过直接耦合将谐振与有源分量结合起来，使振荡器变得更容易振荡;从而提高了振荡器的性能。在12.24GHz和12.49GHz时，输出功率分别为4.79dBm和7.02dBm。控制电压范围为1V ~ 12V。12.49GHz时的相位噪声为-66.73dBc/Hz@100KHz。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Design of a Ku-band voltage controlled oscillator

In this paper, a Ku band voltage controlled oscillator with a frequency range of 220MHz is presented. By changing the traditional structure, combining the resonance with the active component through direct coupling, the oscillator becomes easier to oscillate; therefore the performance of the oscillator has been improved. The output power is 4.79dBm and 7.02dBm at 12.24GHz and 12.49GHz, respectively. The control voltage ranges from 1V to 12V. The phase noise is -66.73dBc/Hz@100KHz at 12.49GHz.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2013 IEEE International Wireless Symposium (IWS)

自引率

0.00%

发文量