Designing an Autonomous Triggering Control System via Motion Detection for IoT Based Smart Home Surveillance CCTV Camera

Security is essential in our daily lives, whether in a personal, home, business, or industrial setting. As a result, to ensure high security, a complicated surveillance system is required. This is typically not cost effective, necessitates more consumable electronic devices, requires more maintenance, and needs more storage space in settings. Hence, the goal of this research is to create a single, small, and simple IOT-based smart closed-circuit television (CCTV) control system. A low-cost smart security system can well be built using the Raspberry Pi microprocessor. The components involve are a camera, a sensor, and a Raspberry Pi board. The proposed smart surveillance system creates a comfortable and safe environment for households to initiate immediate recording of the surrounding upon triggering of sensors assemble at the specific entrance or exit points at home. Raspberry Pi microprocessor is used to be integrated with closed-circuit surveillance camera with motion detection, allowing smart automation of home surveillance system at a cost-effective manner. When the Raspberry Pi is connected to the Internet, the user may even remotely turn on or off the CCTV using the smartphone application. The system was tested with movement at the sensor from a range of distances based on the location setting. It can deliver the anticipated output such as alarm triggering, automated initiating recording of surrounding from the CCTV camera, sending an alert notification to the user's mobile phone, allowing monitoring of the location setting through the user's device, as well as turning off the CCTV camera through the user's device via the developed system.