Improving the productivity of the cutter-loader

The task of the conducted research is to determine the dependence of the productivity of the cutter-loader on the parameters of the engagement of the teeth of the wheel-rack mover of chainless haulage systems. To solve this problem, the dependence of the influence of the parameters of the toothed gearing of the wheel-rack mover of the chainless haulage system on the performance of the cutter-loader is found using the mathematical apparatus. The equation of the balance of the power of the cutter-loader is made, taking into account the mechanical energy input for the destruction of the formation, loading the destroyed mineral mass onto the face conveyor (relevant for cutter-loaders for excavating thin flat-lying seams) and moving the cutter-loader. The theoretical performance of the cutter-loader depends on the redistribution of the mechanical energy of the drive electric motor, aimed at the destruction of the mineral and the translational movement of the cutter-loader. The correlation of the productivity of the cutter-loader with the parameters of the engagement of the teeth of the wheel-rack mover of chainless haulage system systems is revealed. The obtained dependences of the performance of the cutter-loader allow assessing the degree of influence of the parameters of the toothed gearing of the mover of the chainless haulage system on the performance of the cutter-loader. The possibility of increasing the minute productivity of the cutter-loader by up to 20% when using a wheel-rack mover of a chainless haulage system with an optimal tooth profile is established.